{"title":"Magazine Racks","description":"\u003cp\u003e19 ESD-safe magazine racks across 6 chassis sizes, belt, gear-track, screw, and 300 °C all-aluminum. 50 slots at 10 mm pitch, loader-ready, stocked in the USA. 20+ units take 10% off automatically.\u003c\/p\u003e","products":[{"product_id":"b0103gc-belt","title":"B0103GC BELT-80C · 50-Slot Belt-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eHow belt adjustment works on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0103GC BELT-80C is a \u003cstrong\u003e50-slot ESD magazine rack\u003c\/strong\u003e with continuous belt-driven width adjustment. A hand-driven belt rotates pulleys at the top and bottom of the chassis, turning two captive lead screws in unison, both side panels travel toward or away from each other on the same revolution. The adjustment is \u003cstrong\u003econtinuous\u003c\/strong\u003e (no stepped clicks, no fixed indices), so any board width from \u003cstrong\u003e10 mm to 250 mm\u003c\/strong\u003e is reachable.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e2 interchangeable Conductive PS side panels\u003c\/strong\u003e, aluminum pillars, galvanized steel base, and \u003cstrong\u003e2 H-type stopper plates\u003c\/strong\u003e (vs. the single stopper bar on gear-track variants). The slot is 5 mm wide × \u003cstrong\u003e4 mm deep\u003c\/strong\u003e, deeper than the gear-track 3.5 mm slot, for tighter board retention through inline conveyor handling. Surface resistance stays in the \u003cstrong\u003econductive 10⁴–10⁶ Ω band\u003c\/strong\u003e per ESD Association classification.\u003c\/p\u003e\n\u003cp\u003eDesigned for the standard 80 °C ambient envelope. For bake or cure cycles, the chassis family also includes the B0103GN-80C \/ GM-200C gear-track variants and the GL HT-300C all-aluminum sibling.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338421428521,"sku":"B0103GC BELT-80C","price":316.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0106-gc-belt-80c-hero.jpg?v=1784176554"},{"product_id":"b0103gl-ht","title":"B0103GL HT-300C · 50-Slot All-Aluminum 300 °C ESD Magazine Rack","description":"\u003ch3\u003eWhat “all-aluminum” actually changes\u003c\/h3\u003e\n\u003cp\u003eThe B0103GL HT-300C swaps the standard PPE side panels for \u003cstrong\u003e5 × interchangeable aluminum sections per wall\u003c\/strong\u003e, no polymer in the thermal path, so the rack stays dimensionally stable through cycles to 300 °C. Lead-free reflow exit temperatures, IPC\/JEDEC J-STD-033 accelerated bake, conformal-coat post-cure, and aerospace high-heat stress testing all run inside the rack’s thermal envelope, load directly from the oven, no cooling step required.\u003c\/p\u003e\n\u003cp\u003eThe slot opens to \u003cstrong\u003e7.5 mm wide\u003c\/strong\u003e (vs 5 mm on regular gear-track) to clear thicker \/ warped \/ populated boards that have grown out of spec after reflow. Same 50-slot capacity, same 10 mm pitch, same gear-track mechanism, same 50–250 mm adjustable width range as the B0103GN-80C cousin. The aluminum-panel construction adds \u003cstrong\u003e1.7 kg\u003c\/strong\u003e of weight (8 kg vs 6.3 kg empty) for the higher-temperature qualification.\u003c\/p\u003e\n\u003cp\u003eSame NASTC ESD report and SGS RoHS certificate as the rest of the B0103 chassis family. The B0103GN-80C and B0103GM-200C cousins offer the same chassis at a lower price for cycles that don’t exceed 80 \/ 200 °C.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422247721,"sku":"B0103GL HT-300C","price":275.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0103gl-ht-hero-43.jpg?v=1784265349"},{"product_id":"b0103gm","title":"B0103GM-200C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eWhat it does on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0103GM-200C is a \u003cstrong\u003e50-slot ESD magazine rack rated to 200 °C (392 °F)\u003c\/strong\u003e, built for in-line SMT automation \u003cem\u003eplus\u003c\/em\u003e moisture-sensitive device (MSD) baking. Same chassis and gear-track mechanism as the B0103GN-80C, the difference is the higher-temperature material qualification, which makes the rack bake-suitable per \u003cstrong\u003eIPC\/JEDEC J-STD-033\u003c\/strong\u003e moisture-removal profiles (typically 90–125 °C for 24–72 hours).\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base. The mixed-material build maintains structural rigidity through repeated thermal cycling, and keeps the entire current path in the \u003cstrong\u003econductive 10⁴–10⁶ Ω band\u003c\/strong\u003e per ESD Association classification. Boards stay in this rack from MSD storage through bake through the SMT line, no transfer container, no extra ESD exposure points.\u003c\/p\u003e\n\u003cp\u003eGear-track adjustment sets board width from \u003cstrong\u003e50 to 250 mm\u003c\/strong\u003e with parallelism maintained across all 50 slots. For higher-temperature aerospace or extreme cure cycles (300 °C), use the B0103GL HT-300C all-aluminum sibling on the same chassis.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422280489,"sku":"B0103GM-200C","price":247.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0103gn-gm-hero.jpg?v=1784176554"},{"product_id":"b0103gn","title":"B0103GN-80C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eWhat it does on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0103GN-80C is a \u003cstrong\u003e50-slot ESD magazine rack\u003c\/strong\u003e built for in-line SMT automation, board storage, and bench-to-bench transport. Gear-track adjustment sets the board width from \u003cstrong\u003e50 to 250 mm\u003c\/strong\u003e in seconds, with parallelism maintained across all 50 slots, one rack covers the full standard-format range without re-tooling.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base. The mixed-material build provides structural rigidity under repeated loading and inline conveyor handling, while keeping the entire current path in the \u003cstrong\u003econductive 10⁴–10⁶ Ω band\u003c\/strong\u003e per ESD Association classification. Sectioned panels can be swapped individually if one is damaged, the rack stays in service.\u003c\/p\u003e\n\u003cp\u003eDesigned for the standard 80 °C ambient envelope (transport, storage, soldering, inspection, cleaning). For bake or cure cycles, see the B0103GM-200C (200 °C) or B0103GL HT-300C (300 °C all-aluminum) siblings on the same chassis.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422313257,"sku":"B0103GN-80C","price":182.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0103gn-hero-43.jpg?v=1784265348"},{"product_id":"b0104m","title":"B0104M-200C · 50-Slot Screw-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eHow screw adjustment works through bake\u003c\/h3\u003e\n\u003cp\u003eThe B0104M-200C is the \u003cstrong\u003e200 °C bake-suitable variant\u003c\/strong\u003e on the same screw-clamp mechanism as the B0104N. Width range is the same 50–250 mm, the chassis dimensions are identical, and the empty weight stays at 6.1 kg, the only difference is the higher-temperature material qualification, which makes the rack \u003cstrong\u003ebake-suitable per IPC\/JEDEC J-STD-033\u003c\/strong\u003e for moisture-removal cycles (typically 90–125 °C for 24–72 hours).\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base. The screw clamp is a precision threaded mechanism that holds the panel position through repeated thermal cycling, once set, the width does not drift through bake \/ transport \/ storage cycles. \u003cstrong\u003eConductive 10⁴–10⁶ Ω band\u003c\/strong\u003e across all contact points; sectioned panels swap individually if one is damaged.\u003c\/p\u003e\n\u003cp\u003ePick this variant when MSD baking is part of your workflow and you want the lower-cost set-once mechanism instead of gear-track quick-change. For lines that change widths frequently, the B0103GM-200C gear-track sibling offers the same 200 °C rating with parallelism-monitored quick adjustment. For the standard 80 °C envelope, use the cheaper B0104N-80C.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422346025,"sku":"B0104M-200C","price":247.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0104n-m-hero.jpg?v=1784176554"},{"product_id":"b0104n","title":"B0104N-80C · 50-Slot Screw-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eHow screw adjustment works on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0104N-80C is a \u003cstrong\u003e50-slot ESD magazine rack\u003c\/strong\u003e with screw-clamp width adjustment, precision mechanical, vibration-resistant, locked once and held through thousands of load cycles. Width range is the same 50–250 mm as the gear-track sibling, but the screw mechanism is \u003cstrong\u003eabout 10–15% lower cost\u003c\/strong\u003e and shaves a fraction of a kilo off the empty weight (6.1 kg vs 6.3 kg).\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base, same materials and same compliance as the gear-track variants. The screw mechanism replaces the gear track \/ pinion assembly with a precision threaded clamp on each side panel. \u003cstrong\u003eConductive 10⁴–10⁶ Ω band\u003c\/strong\u003e across all contact points; sectioned panels swap individually if one gets damaged.\u003c\/p\u003e\n\u003cp\u003ePick the screw variant when your line runs a fixed board width for the duration of the program, you set the width once, lock it, and the rack runs for weeks without re-adjustment. For frequent width changes, the B0103GN-80C gear-track sibling is faster to set. For 200 °C bake on the screw mechanism, use the B0104M-200C.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422411561,"sku":"B0104N-80C","price":182.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0104n-m-hero.jpg?v=1784176554"},{"product_id":"b0105gpm","title":"B0105GPM-120C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eThe all-plastic chassis that survives the bake\u003c\/h3\u003e\n\u003cp\u003eThe B0105GPM-120C is the \u003cstrong\u003e120 °C bake-suitable variant\u003c\/strong\u003e on the same all-plastic chassis as the B0105GPN. Same Conductive PS base, same Conductive PPE side panels, same aluminum pillars, same gear-track mechanism, same 50–250 mm width range. The only meaningful difference: temperature qualification, which extends the upper limit from 80 °C to 120 °C and pulls the lower limit back to −20 °C.\u003c\/p\u003e\n\u003cp\u003eWhy 120 °C: most MSD moisture-removal bake profiles run at \u003cstrong\u003e90–110 °C for extended periods\u003c\/strong\u003e. The GPM-120C covers that range with headroom while keeping the 4.8 kg lightest-in-catalog weight. For bake profiles that exceed 120 °C (full IPC\/JEDEC J-STD-033 accelerated 125 °C, or 200 °C cure cycles), step up to the metal-base B0103GM-200C.\u003c\/p\u003e\n\u003cp\u003eSame NASTC ESD report and SGS RoHS certificate as the B0105GPN-80C and the metal-base B0103 family, conductive 10⁴–10⁶ Ω band across the whole current path. Loader-compatible with ASM SIPLACE \/ Yamaha YSM \/ Panasonic NPM \/ Juki RS standard interfaces.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422444329,"sku":"B0105GPM-120C","price":189.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0105-plastic-hero.jpg?v=1784176554"},{"product_id":"b0105gpn","title":"B0105GPN-80C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eWhat “all-plastic” actually changes\u003c\/h3\u003e\n\u003cp\u003eThe B0105GPN-80C is a \u003cstrong\u003e50-slot ESD magazine rack with all-plastic construction\u003c\/strong\u003e. The chassis swaps the galvanized-steel base of the B0103 family for a \u003cstrong\u003eConductive PS (polystyrene) base\u003c\/strong\u003e, while keeping the same 5 × Conductive PPE side panels and aluminum pillars. Result: same 50-slot capacity, same gear-track mechanism, same 50–250 mm width range, \u003cstrong\u003e1.5 kg lighter per rack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWhy it matters: across a production floor with 30–50 racks moving daily between stations, 1.5 kg per rack is a meaningful operator-fatigue savings. The all-plastic chassis is also the right pick when your environment requires a \u003cstrong\u003enon-metallic chassis\u003c\/strong\u003e (cleanroom, high-RF, or specific contamination protocols), and when minimum-weight per loaded transport matters (cart capacity, shelf load).\u003c\/p\u003e\n\u003cp\u003eThe plastic base preserves the \u003cstrong\u003econductive 10⁴–10⁶ Ω band\u003c\/strong\u003e across the entire current path, same NASTC ESD report and SGS RoHS certificate as the metal-base B0103 family. Standard 80 °C envelope; for bake-suitability on the same all-plastic chassis, use the B0105GPM-120C. For higher temperatures, switch to a metal-base sibling on the B0103 chassis.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422477097,"sku":"B0105GPN-80C","price":173.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0105-plastic-hero.jpg?v=1784176554"},{"product_id":"b0106gc-belt","title":"B0106GC BELT-80C · 50-Slot Belt-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eHow belt adjustment works on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0106GC BELT-80C is a \u003cstrong\u003elarge-format 50-slot ESD magazine rack\u003c\/strong\u003e with continuous belt-driven width adjustment. A hand-driven belt rotates pulleys at the top and bottom of the chassis, turning two captive lead screws in unison, both side panels travel toward or away from each other on the same revolution. The adjustment is \u003cstrong\u003econtinuous\u003c\/strong\u003e (no stepped clicks, no fixed indices), so any board width from \u003cstrong\u003e10 mm to 330 mm\u003c\/strong\u003e is reachable on a single rack.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e2 interchangeable Conductive PS side panels\u003c\/strong\u003e, aluminum pillars, galvanized steel base, and \u003cstrong\u003e2 H-type stopper plates\u003c\/strong\u003e (vs. the single stopper bar on gear-track variants). The slot is 5 mm wide × \u003cstrong\u003e4 mm deep\u003c\/strong\u003e, deeper than the gear-track 3.5 mm slot, for tighter board retention through inline conveyor handling. Surface resistance stays in the \u003cstrong\u003econductive 10⁴–10⁶ Ω band\u003c\/strong\u003e per ESD Association classification.\u003c\/p\u003e\n\u003cp\u003eDesigned for the standard 80 °C ambient envelope. For bake or cure cycles, the large-format chassis family also includes the B0106GN-80C \/ GM-200C gear-track variants and the GL HT-300C all-aluminum sibling.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422509865,"sku":"B0106GC BELT-80C","price":420.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0106-gc-belt-80c-hero.jpg?v=1784176554"},{"product_id":"b0106gl-ht","title":"B0106GL HT-300C · 50-Slot All-Aluminum 300 °C ESD Magazine Rack","description":"\u003ch3\u003eLarge-format chassis with the all-aluminum 300 °C build\u003c\/h3\u003e\n\u003cp\u003eThe B0106GL HT-300C is the \u003cstrong\u003elarge-format sibling\u003c\/strong\u003e of the B0103GL HT-300C, same all-aluminum 300 °C qualification, same 7.5 mm wide slot, same gear-track mechanism, same compliance. The only difference is the chassis: \u003cstrong\u003e460 × 400 × 563 mm\u003c\/strong\u003e instead of 355 × 320 × 563 mm, with adjustable board width up to \u003cstrong\u003e330 mm\u003c\/strong\u003e and max board length to \u003cstrong\u003e460 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e5 × interchangeable aluminum side panels per wall, \u003cstrong\u003eno polymer in the thermal path\u003c\/strong\u003e, so the rack stays dimensionally stable through cycles to 300 °C. Lead-free reflow direct loading, IPC\/JEDEC J-STD-033 accelerated bake, conformal-coat post-cure, and aerospace high-heat stress testing all run inside the rack’s thermal envelope.\u003c\/p\u003e\n\u003cp\u003eThe aluminum-panel construction across the larger chassis brings the empty weight to \u003cstrong\u003e10.6 kg\u003c\/strong\u003e (vs 8 kg on the standard-format HT, and 8.3 kg on the B0106GN-80C standard-temp cousin). Gear track is the standard adjustment mechanism; \u003cstrong\u003escrew adjustment configuration is also available\u003c\/strong\u003e. Same NASTC ESD report and SGS RoHS certificate as the rest of the B0106 chassis family.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422542633,"sku":"B0106GL HT-300C","price":348.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0106gl-ht-300c-hero.jpg?v=1784176554"},{"product_id":"b0106gm","title":"B0106GM-200C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eWhat it does on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0106GM-200C is a \u003cstrong\u003elarge-format 50-slot ESD magazine rack rated to 200 °C (392 °F)\u003c\/strong\u003e, built for in-line SMT automation \u003cem\u003eplus\u003c\/em\u003e moisture-sensitive device (MSD) baking on big boards. Same chassis and gear-track mechanism as the B0106GN-80C, the difference is the higher-temperature material qualification, which makes the rack bake-suitable per \u003cstrong\u003eIPC\/JEDEC J-STD-033\u003c\/strong\u003e moisture-removal profiles (typically 90–125 °C for 24–72 hours).\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base. Same conductive 10⁴–10⁶ Ω surface band per ESD Association classification, same NASTC test report. The bake-suitable PPE qualification adds headroom for J-STD-033 accelerated bake (125 °C) and conformal-coat post-cure (typically 150–200 °C) without panel softening or off-gassing.\u003c\/p\u003e\n\u003cp\u003eGear-track adjustment sets board width from \u003cstrong\u003e50 to 330 mm\u003c\/strong\u003e with parallelism maintained across all 50 slots. For aerospace-grade cure cycles above 200 °C, use the B0106GL HT-300C all-aluminum sibling on the same large chassis (300 °C ceiling, swaps PPE for aluminum panels).\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422575401,"sku":"B0106GM-200C","price":326.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0106gn-gm-hero.jpg?v=1784176554"},{"product_id":"b0106gn","title":"B0106GN-80C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eWhat it does on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0106GN-80C is a \u003cstrong\u003elarge-format 50-slot ESD magazine rack\u003c\/strong\u003e built for in-line SMT automation, board storage, and bench-to-bench transport on big-board lines. Gear-track adjustment sets the board width from \u003cstrong\u003e50 to 330 mm\u003c\/strong\u003e in seconds, with parallelism maintained across all 50 slots, one rack covers the full large-format range (up to 460 × 330 mm boards) without re-tooling.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base. The mixed-material build provides structural rigidity under repeated loading and inline conveyor handling, while keeping the entire current path in the \u003cstrong\u003econductive 10⁴–10⁶ Ω band\u003c\/strong\u003e per ESD Association classification. Sectioned panels can be swapped individually if one is damaged, the rack stays in service.\u003c\/p\u003e\n\u003cp\u003eDesigned for the standard 80 °C ambient envelope (transport, storage, soldering, inspection, cleaning). For bake or cure cycles, see the B0106GM-200C (200 °C) or B0106GL HT-300C (300 °C all-aluminum) siblings on the same large-format chassis.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422608169,"sku":"B0106GN-80C","price":250.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0106gn-gm-hero.jpg?v=1784176554"},{"product_id":"b0108gm","title":"B0108GM-200C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eWhat it does on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0108GM-200C is an \u003cstrong\u003eextra-large-format 50-slot ESD magazine rack rated to 200 °C (392 °F)\u003c\/strong\u003e, built for in-line SMT automation \u003cem\u003eplus\u003c\/em\u003e moisture-sensitive device (MSD) baking on long boards. Same chassis and gear-track mechanism as the B0108GN-80C, the difference is the higher-temperature material qualification, which makes the rack bake-suitable per \u003cstrong\u003eIPC\/JEDEC J-STD-033\u003c\/strong\u003e moisture-removal profiles (typically 90–125 °C for 24–72 hours).\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base. Same conductive 10⁴–10⁶ Ω surface band per ESD Association classification, same NASTC test report. The bake-suitable PPE qualification adds headroom for J-STD-033 accelerated bake (125 °C) and conformal-coat post-cure (typically 150–200 °C) without panel softening or off-gassing.\u003c\/p\u003e\n\u003cp\u003eGear-track adjustment sets board width from \u003cstrong\u003e50 to 390 mm\u003c\/strong\u003e with parallelism maintained across all 50 slots. \u003cstrong\u003eNote:\u003c\/strong\u003e the B0108 chassis is the only B-series chassis without a 300 °C HT variant, for aerospace-grade cure cycles above 200 °C, step up to the B0109GL HT-300C all-aluminum on the maximum-format chassis or step down to the B0106GL HT-300C on the large-format chassis.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422640937,"sku":"B0108GM-200C","price":420.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0108gn-gm-hero.jpg?v=1784176554"},{"product_id":"b0108gn","title":"B0108GN-80C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eWhat it does on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0108GN-80C is an \u003cstrong\u003eextra-large-format 50-slot ESD magazine rack\u003c\/strong\u003e built for in-line SMT automation, board storage, and bench-to-bench transport on long-board lines. Gear-track adjustment sets the board width from \u003cstrong\u003e50 to 390 mm\u003c\/strong\u003e in seconds, with parallelism maintained across all 50 slots, one rack covers the full extra-large-format range (up to 535 × 390 mm boards) without re-tooling.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base. The mixed-material build provides structural rigidity under repeated loading and inline conveyor handling, while keeping the entire current path in the \u003cstrong\u003econductive 10⁴–10⁶ Ω band\u003c\/strong\u003e per ESD Association classification. Sectioned panels can be swapped individually if one is damaged, the rack stays in service.\u003c\/p\u003e\n\u003cp\u003eDesigned for the standard 80 °C ambient envelope (transport, storage, soldering, inspection, cleaning). For bake or cure cycles, see the B0108GM-200C (200 °C) sibling on the same extra-large chassis. \u003cstrong\u003eNote:\u003c\/strong\u003e the B0108 chassis is the only B-series chassis without belt or 300 °C HT variants, for continuous belt or 300 °C aerospace cure, see the B0106GC BELT or B0109GL HT-300C.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422673705,"sku":"B0108GN-80C","price":328.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0108gn-gm-hero.jpg?v=1784176554"},{"product_id":"b0109gc-belt","title":"B0109GC BELT-80C · 50-Slot Belt-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eHow belt adjustment works on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0109GC BELT-80C is a \u003cstrong\u003emaximum-format 50-slot ESD magazine rack\u003c\/strong\u003e with continuous belt-driven width adjustment. A hand-driven belt rotates pulleys at the top and bottom of the chassis, turning two captive lead screws in unison, both side panels travel toward or away from each other on the same revolution. The adjustment is \u003cstrong\u003econtinuous\u003c\/strong\u003e (no stepped clicks, no fixed indices), so any board width from \u003cstrong\u003e10 mm to 460 mm\u003c\/strong\u003e is reachable on a single rack, the \u003cstrong\u003ewidest belt range in the catalog\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e2 interchangeable Conductive PS side panels\u003c\/strong\u003e, aluminum pillars, galvanized steel base, and \u003cstrong\u003e2 H-type stopper plates\u003c\/strong\u003e (vs. the single stopper bar on gear-track variants). The slot is 5 mm wide × \u003cstrong\u003e4 mm deep\u003c\/strong\u003e, deeper than the gear-track 3.5 mm slot, for tighter board retention through inline conveyor handling. Surface resistance stays in the \u003cstrong\u003econductive 10⁴–10⁶ Ω band\u003c\/strong\u003e per ESD Association classification.\u003c\/p\u003e\n\u003cp\u003eDesigned for the standard 80 °C ambient envelope. For bake or cure cycles, the maximum-format chassis family also includes the B0109GN-80C \/ GM-200C gear-track variants and the GL HT-300C all-aluminum sibling.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422706473,"sku":"B0109GC BELT-80C","price":531.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0109gc-belt-80c-hero.jpg?v=1784176554"},{"product_id":"b0109gl-ht","title":"B0109GL HT-300C · 50-Slot All-Aluminum 300 °C ESD Magazine Rack","description":"\u003ch3\u003eThe widest 300 °C rack in the catalog\u003c\/h3\u003e\n\u003cp\u003eThe B0109GL HT-300C is the \u003cstrong\u003emaximum-format sibling\u003c\/strong\u003e of the B0103GL HT-300C and B0106GL HT-300C, same all-aluminum 300 °C qualification, same 7.5 mm wide slot, same gear-track mechanism, same compliance. The only difference is the chassis: \u003cstrong\u003e535 × 530 × 569 mm\u003c\/strong\u003e, with adjustable board width up to \u003cstrong\u003e460 mm\u003c\/strong\u003e and max board length to \u003cstrong\u003e535 mm\u003c\/strong\u003e. Backplanes, motherboards, and oversized industrial PCBs that don’t fit the smaller HT chassis fit here.\u003c\/p\u003e\n\u003cp\u003e5 × interchangeable aluminum side panels per wall, \u003cstrong\u003eno polymer in the thermal path\u003c\/strong\u003e, so the rack stays dimensionally stable through cycles to 300 °C. Lead-free reflow direct loading, IPC\/JEDEC J-STD-033 accelerated bake, conformal-coat post-cure, and aerospace high-heat stress testing all run inside the rack’s thermal envelope.\u003c\/p\u003e\n\u003cp\u003eThe aluminum-panel construction across the maximum-format chassis brings the empty weight to \u003cstrong\u003e15 kg\u003c\/strong\u003e (vs 8 kg on standard-format HT, and 10.6 kg on large-format HT). Gear track is the standard adjustment mechanism; \u003cstrong\u003escrew adjustment configuration is also available\u003c\/strong\u003e. Same NASTC ESD report and SGS RoHS certificate as the rest of the B0109 chassis family.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422739241,"sku":"B0109GL HT-300C","price":509.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0109gl-ht-300c-hero.jpg?v=1784176554"},{"product_id":"b0109gm","title":"B0109GM-200C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eWhat it does on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0109GM-200C is a \u003cstrong\u003emaximum-format 50-slot ESD magazine rack rated to 200 °C (392 °F)\u003c\/strong\u003e, built for in-line SMT automation \u003cem\u003eplus\u003c\/em\u003e moisture-sensitive device (MSD) baking on the widest board lines, backplanes, motherboards, oversized industrial PCBs. Same chassis and gear-track mechanism as the B0109GN-80C, the difference is the higher-temperature material qualification, which makes the rack bake-suitable per \u003cstrong\u003eIPC\/JEDEC J-STD-033\u003c\/strong\u003e moisture-removal profiles (typically 90–125 °C for 24–72 hours).\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base. Same conductive 10⁴–10⁶ Ω surface band per ESD Association classification, same NASTC test report. The bake-suitable PPE qualification adds headroom for J-STD-033 accelerated bake (125 °C) and conformal-coat post-cure (typically 150–200 °C) without panel softening or off-gassing.\u003c\/p\u003e\n\u003cp\u003eGear-track adjustment sets board width from \u003cstrong\u003e50 to 460 mm\u003c\/strong\u003e with parallelism maintained across all 50 slots, widest gear range in the catalog. For aerospace-grade cure cycles above 200 °C, use the B0109GL HT-300C all-aluminum sibling on the same maximum chassis (300 °C ceiling, swaps PPE for aluminum panels).\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422772009,"sku":"B0109GM-200C","price":494.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0109gn-gm-hero.jpg?v=1784176554"},{"product_id":"b0109gn","title":"B0109GN-80C · 50-Slot Gear-Adjustable ESD Magazine Rack","description":"\u003ch3\u003eWhat it does on your line\u003c\/h3\u003e\n\u003cp\u003eThe B0109GN-80C is a \u003cstrong\u003emaximum-format 50-slot ESD magazine rack\u003c\/strong\u003e built for in-line SMT automation, board storage, and bench-to-bench transport on the widest board lines, backplanes, motherboards, oversized industrial PCBs. Gear-track adjustment sets the board width from \u003cstrong\u003e50 to 460 mm\u003c\/strong\u003e in seconds, with parallelism maintained across all 50 slots, one rack covers the full maximum-format range (up to 535 × 460 mm boards) without re-tooling.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cstrong\u003e5 interchangeable Conductive PPE side panels per wall\u003c\/strong\u003e, aluminum pillars, galvanized steel base. The mixed-material build provides structural rigidity under repeated loading and inline conveyor handling, while keeping the entire current path in the \u003cstrong\u003econductive 10⁴–10⁶ Ω band\u003c\/strong\u003e per ESD Association classification. Sectioned panels can be swapped individually if one is damaged, the rack stays in service.\u003c\/p\u003e\n\u003cp\u003eDesigned for the standard 80 °C ambient envelope (transport, storage, soldering, inspection, cleaning). For bake or cure cycles, see the B0109GM-200C (200 °C) or B0109GL HT-300C (300 °C all-aluminum) siblings on the same maximum-format chassis. For narrow-flex flexibility on the same chassis, see the B0109GC BELT-80C, widest belt range in the catalog.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422804777,"sku":"B0109GN-80C","price":406.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0109gn-gm-hero.jpg?v=1784176554"},{"product_id":"karry-all-35","title":"Karry-All 35 · Portable ESD PCB Karrier (30-Slot)","description":"\u003ch3\u003eWhat the Karry-All 35 actually is\u003c\/h3\u003e\n\u003cp\u003eThe Karry-All 35 is an \u003cstrong\u003eESD conductive PCB carrier\u003c\/strong\u003e, same form as a magazine rack (vertically slotted board rails) but with two key deltas: \u003cstrong\u003efixed slots (no adjustment mechanism)\u003c\/strong\u003e and \u003cstrong\u003eno rear stopper\u003c\/strong\u003e. Boards sit upright in 30 fixed-pitch slots and the karrier drops into any outer box or tote, the outer container is the enclosure. Hence the name: a \u003cem\u003ekarrier\u003c\/em\u003e for boards, designed to be carried inside something else.\u003c\/p\u003e\n\u003cp\u003eTriple use case: \u003cstrong\u003e(1) slot separator\u003c\/strong\u003e inside a carton, keeping boards vertically aligned and edge-protected without foam or cardboard inserts; \u003cstrong\u003e(2) transport karrier\u003c\/strong\u003e when slipped into a transit container, with the outer tote providing dust \/ FOD \/ impact protection; \u003cstrong\u003e(3) storage frame\u003c\/strong\u003e at a station for short-term board staging during inspection, QC, or rework.\u003c\/p\u003e\n\u003cp\u003eSingle-piece \u003cstrong\u003econductive polypropylene (PP)\u003c\/strong\u003e construction. Surface resistance spans the \u003cstrong\u003e10⁴–10⁹ Ω band\u003c\/strong\u003e, wider than the magazine-rack 10⁴–10⁶ band, covering both the conductive and dissipative ESD classifications. \u003cstrong\u003eNot for in-line SMT loaders, baking, or any cycle above 80 °C.\u003c\/strong\u003e For inline SMT integration use a B0103-series magazine rack; for benchtop slotted-edge access use an RA-series transport rack.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422903081,"sku":"Karry-All 35","price":295.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-karry-all-35-hero.jpg?v=1784176554"},{"product_id":"magazine-rack-line-kit","title":"Magazine Rack Line Kit · Fleet + Spares","description":"\u003cp\u003e\u003cstrong\u003eRacks are bought in tens, not ones. This is the one line item that outfits the line.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTell us the fleet and the board mix and you get one quote for the whole floor: the racks, the spares that keep them running, one PO for purchasing, one crate for receiving.\u003c\/p\u003e\n\u003ch3\u003eWhat a line kit is\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 or more magazine racks in your model mix.\u003c\/strong\u003e Any combination across the gear, belt, screw and 300 °C all-aluminum families. Volume pricing applies automatically at 20 units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne of every wear part.\u003c\/strong\u003e Gear track, stopper bar, lever set, side panels, pillar: the parts that turn a dropped rack into a small parts order instead of a replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCare guide for the fleet.\u003c\/strong\u003e The cleaning list that protects the ESD surface and the five-minute weekly check.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eRequest the quote with your board sizes and process temperatures, or just the line you are outfitting. An engineer confirms the model mix against your boards before anything ships, so the fleet that arrives is the fleet that fits.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53397636448553,"sku":"RACK-LINE-KIT","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-b0103gn-hero-43_b84a61cf-c982-45c6-aae8-1c2df5a17667.jpg?v=1785652175"}],"url":"https:\/\/pcbracks.com\/collections\/magazine-racks.oembed","provider":"PCBRACKS.COM","version":"1.0","type":"link"}