{"title":"Universal Racks","description":"\u003cp\u003e8 SKUs for the bench: slotted-edge carry racks, angled PCB holders, and ESD turntables. Grounded, stackable, stocked in the USA, on your dock the same week.\u003c\/p\u003e","products":[{"product_id":"d380","title":"D380 · ESD Turntable","description":"\u003cp\u003eThe D380 is a 380 mm (15″) diameter ESD-safe turntable rated for loads up to 200 lbs (91 kg). The top surface is conductive rubber bonded to a durable plastic disc; the unit sits flat on any workbench at just 12 mm (0.5″) tall and rotates 360 degrees freely on a smooth bearing.\u003c\/p\u003e\n\u003cp\u003eThe conductive rubber surface provides continuous ESD protection with a surface resistivity of 5 × 10⁶ Ω and volume resistivity of 1 × 10⁷ Ω, squarely in the dissipative range required by ANSI\/ESD S20.20 work areas. Compatible with assemblies coming off reflow or selective solder that have not fully cooled (rated to 85 °C \/ 185 °F).\u003c\/p\u003e\n\u003cp\u003eNo power. No compressed air. No setup. Drop it on the bench and start using it. The 1.63 kg (3.6 lb) unit weight keeps the turntable planted under load without sliding around when the operator works at the edge of the disc.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422837545,"sku":"D380","price":117.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-d380-hero.jpg?v=1784176554"},{"product_id":"d500","title":"D500 · ESD Turntable","description":"\u003cp\u003eThe D500 is a 500 mm (20″) diameter ESD-safe turntable rated for loads up to 250 lbs (113 kg), sized for larger PCB assemblies (up to 350 × 350 mm) and mechanical builds. The top surface is conductive rubber bonded to a durable plastic disc; the unit sits flat on any workbench at just 15 mm (0.6″) tall and rotates 360 degrees freely on a smooth bearing.\u003c\/p\u003e\n\u003cp\u003eThe conductive rubber surface provides continuous ESD protection with a surface resistivity of 5 × 10⁶ Ω and volume resistivity of 1 × 10⁷ Ω, squarely in the dissipative range required by ANSI\/ESD S20.20 work areas. Compatible with assemblies coming off reflow or selective solder that have not fully cooled (rated to 85 °C \/ 185 °F).\u003c\/p\u003e\n\u003cp\u003eNo power. No compressed air. No setup. Drop it on the bench and start using it. The 2.88 kg (6.3 lb) unit weight is heavier than the D380, the larger disc plus the higher load capacity demand a more substantial base, which keeps the turntable planted even when the operator pushes hard at the outer edge.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422870313,"sku":"D500","price":181.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-d500-hero.jpg?v=1784176554"},{"product_id":"pcbh-2l-c","title":"PCBH-2L-C · Angled ESD PCB Holder (Pack of 10)","description":"\u003cp\u003eThe PCBH-2L-C is a 25-slot conductive polypropylene wide-base board holder with a double wide-angle, L-shaped design. Each slot is 3 mm wide with a 5 mm depth and a 5 mm pitch, the tightest pitch in the catalog, and the angled L-presentation fans boards out for direct visual and physical access to both sides without pulling any one board out of its slot.\u003c\/p\u003e\n\u003cp\u003eThe 355 × 270 mm footprint sits stable on workbenches, inspection tables, and ESD-safe carts. At 130 mm tall, boards sit high enough that operators don’t bend or reach into a flat rack to read marking, solder joints, or component placement. 0.44 kg empty, heavier than the PCBH-C, which keeps the holder planted when boards are added or removed.\u003c\/p\u003e\n\u003cp\u003eConductive PP material at 10⁴–10⁹ Ω, spanning both the conductive and dissipative ESD bands, keeps boards protected through inspection, QC, and hand work. Not for in-line SMT automation, this is the operator-facing inspection \/ QC workhorse.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422935849,"sku":"PCBH-2L-C","price":319.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-pcbh-2l-c-23.jpg?v=1784176554"},{"product_id":"pcbh-c","title":"PCBH-C · Angled ESD PCB Holder (Pack of 10)","description":"\u003cp\u003eThe PCBH-C is a 25-slot conductive polypropylene board holder built for benchtop use. Each slot is 3 mm wide with a 5 mm depth and a tight 6 mm pitch, holding boards upright at a wide-angle vertical for clean one-hand insertion and removal during active work.\u003c\/p\u003e\n\u003cp\u003eThe compact 265 × 205 mm footprint fits next to a soldering iron, hot-air station, or microscope without taking over the bench. The 95 mm tall body provides structural support so the holder won’t tip when picked up loaded, and boards can overhang on both sides of the 205 mm rack width if needed.\u003c\/p\u003e\n\u003cp\u003eConductive PP material at 10⁴–10⁹ Ω, spanning both the conductive and dissipative ESD bands, keeps boards protected through hand soldering, inspection, and rework. Not for in-line SMT automation, the tight pitch and benchtop form are optimized for operator-facing work.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338422968617,"sku":"PCBH-C","price":319.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-pcbh-c-2.jpg?v=1784176554"},{"product_id":"ra-16c","title":"RA-16C · Slotted-Edge ESD PCB Rack (Pack of 10)","description":"\u003cp\u003eThe RA-16C is a 25-slot conductive polypropylene rack built for standard-thickness PCBs (up to 1.6 mm). Each slot is 2 mm wide with a 4 mm depth and 15 mm pitch, holding boards upright and separated with zero surface contact between assemblies.\u003c\/p\u003e\n\u003cp\u003eBoards span the 160 mm rack width and can overhang on both sides, so panels wider than the rack body are fully supported in the slots. At 0.34 kg empty, the rack is light enough to move loaded between workstations without operator fatigue.\u003c\/p\u003e\n\u003cp\u003eThe conductive PP material maintains system resistance of 10⁴–10⁶ Ω, keeping boards in the conductive range from SMT placement through final inspection. Ideal for storage, hand soldering, and inspection \/ QC stations.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338423001385,"sku":"RA-16C","price":369.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-ra-16c-hero.jpg?v=1784176554"},{"product_id":"ra-17c","title":"RA-17C · Slotted-Edge ESD PCB Rack (Pack of 10)","description":"\u003cp\u003eThe RA-17C is a 25-slot conductive polypropylene rack built for thicker PCBs, up to 2.4 mm (heavy-copper, multilayer, or populated assemblies). Each slot is 3 mm wide with a 7.5 mm depth, nearly twice the depth of a shallow-slot rack, and 16 mm pitch.\u003c\/p\u003e\n\u003cp\u003eThat extra depth matters when boards are populated or heavy: they stay put during transport between stations, no tipping, no walking out of the slot mid-handoff. Boards span the 160 mm rack width and can overhang on both sides, so panels wider than the rack body are fully supported.\u003c\/p\u003e\n\u003cp\u003eThe conductive PP material maintains system resistance of 10⁴–10⁶ Ω, keeping boards in the conductive range from SMT placement through final inspection. The deep-slot pick when one rack needs to handle both standard 1.6 mm and heavier 2.4 mm boards on the same line.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338423034153,"sku":"RA-17C","price":359.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-ra-17c-hero.jpg?v=1784176554"},{"product_id":"ra-18c","title":"RA-18C · Slotted-Edge ESD PCB Rack (Pack of 10)","description":"\u003cp\u003eThe RA-18C is a 25-slot conductive polypropylene rack with double-sided slots (boards engaged from both edges, not just one) and integrated carry handles molded into both ends. Each slot is 3 mm wide with a 7.5 mm depth and 15 mm pitch, gripping boards rigidly on two sides for a hold that single-sided racks can’t match.\u003c\/p\u003e\n\u003cp\u003eThe two-edge grip matters most for two-side-populated assemblies, heavy-copper boards, and anything that has to be moved across the floor. Boards can’t rock, can’t walk out of the slot mid-transport, and the molded handles let one operator carry a fully loaded rack two-handed across doors, carts, and elevators.\u003c\/p\u003e\n\u003cp\u003eBoards span the 140 mm rack width and can overhang on both sides. The conductive PP material maintains system resistance of 10⁴–10⁶ Ω. Best seller in the slotted-edge series, the rack of choice when transport stability matters more than maximum board face area.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338423066921,"sku":"RA-18C","price":359.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/pcbr-ra-18c-hero.jpg?v=1784176554"},{"product_id":"ra-19c","title":"RA-19C · Slotted-Edge ESD PCB Rack (Pack of 10)","description":"\u003cp\u003eThe RA-19C is a 25-slot conductive polypropylene rack built for high-density storage. Each slot is 2.8 mm wide with a full 8 mm depth and a tight 12.2 mm pitch, the deepest engagement and tightest packing of any rack in the slotted-edge series.\u003c\/p\u003e\n\u003cp\u003eThe 172 mm rack width gives a wider base than most universal racks, and the 50 mm tall body provides more structural support during stacking. Boards seat deeper and closer together than standard-pitch alternatives, perfect for high-density WIP, tight floor space, or production lines that need to maximize storage per linear foot.\u003c\/p\u003e\n\u003cp\u003eMax board thickness is 2.2 mm (slightly less than RA-17C\/18CP because the slot is narrower at 2.8 mm vs. 3 mm). Boards span the rack and can overhang on both sides. Conductive PP material at 10⁴–10⁶ Ω keeps boards in the conductive range from SMT placement through final inspection.\u003c\/p\u003e","brand":"PCBRacks","offers":[{"title":"Default Title","offer_id":53338423099689,"sku":"RA-19C","price":375.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/0499\/0249\/files\/ra-19c-clear.png?v=1784794794"}],"url":"https:\/\/pcbracks.com\/collections\/universal-racks.oembed","provider":"PCBRACKS.COM","version":"1.0","type":"link"}