ESD PCB racks

ESD PCB Storage Racks

Conductive ESD racks that store 50 boards between process steps and feed straight into SMT loaders. The width adjusts to your board, and in-stock racks ship from the US in under 24 hours.

B0103GN-80C ESD PCB magazine rack, three-quarter view: black conductive side panels, aluminum pillars and steel base; 50 slots, 10 mm (0.394 in) pitch, gear-track adjust 50 to 250 mm (1.97 to 9.84 in), rated 80 °C (176 °F)
Our best seller

B0103GN-80C · Rack magazine ESD 50 fentes à réglage par pignon

$188.00 each
In stock · ships in under 24 h · USA
Slots
50, at 10 mm (0.394″) pitch
Board width
50 to 250 mm (1.97″ to 9.84″), gear-track adjust
Boards
up to 355 × 250 mm (13.98″ × 9.84″)
Temperature
−20 to +80 °C (−4 to 176 °F)
Fits
standard in-line SMT loaders and unloaders
Made for
IPC board handling, on the line and in storage
Full specs Spec sheet (PDF) Ask an engineer
B0103GN-80C ESD PCB magazine rack, three-quarter view: black conductive side panels, aluminum pillars and steel base; 50 slots, 10 mm (0.394 in) pitch, gear-track adjust 50 to 250 mm (1.97 to 9.84 in), rated 80 °C (176 °F)
Conductive, 10⁴ to 10⁶ Ω
Ships from the US
20+ racks save 10%
An engineer confirms the fit

For larger boards

B0106GN-80C ESD PCB magazine rack, three-quarter view: black conductive side panels, aluminum pillars and steel base; 50 slots, 10 mm (0.394 in) pitch, gear-track adjust 50 to 330 mm (1.97 to 12.99 in), rated 80 °C (176 °F)

B0106GN-80C · Rack magazine ESD 50 fentes à réglage par pignon

Boards up to 460 × 330 mm (18.11″ × 12.99″) in a 460 × 400 × 563 mm (18.11″ × 15.75″ × 22.17″) chassis, 50 slots.

$257.00 each

See it

Not sure which size? Enter your board size →

Questions

Ask Sam. Answers in seconds.

Sam is our spec engineer: sizes, part numbers, ESD, shipping. Tap a question or type your own.

Read all the answers

What is an ESD PCB storage rack?

A conductive rack that holds circuit boards in slots so they never touch while they wait between process steps. SMT magazine racks like the B0103GN-80C also feed boards straight into your loaders.

Which size do I need?

Match the rack to your board: the B0103 takes boards up to 355 × 250 mm (13.98″ × 9.84″), the B0106 up to 460 × 330 mm (18.11″ × 12.99″). The PCB Rack Finder picks it from your board size.

Are they ESD safe?

Yes. They are conductive, 10⁴ to 10⁶ Ω, so charge drains to ground instead of sitting on your boards.

Can they go in a bake oven?

The standard racks are rated to 80 °C (176 °F). The same sizes come rated 200 °C (392 °F) for bake cycles, and all-aluminum racks go to 300 °C (572 °F).

Do they need assembly?

Magazine racks ship flat and go together with the supplied screws.

How fast do they ship?

In-stock racks ship from the US in under 24 hours. 20 or more magazine racks save 10%, applied at checkout.

Fitting out a whole line?

Send the board sizes and your loader model. A bulk quote comes back within one business day.

Buy nowTalk to an engineer