PCB Rack Finder

Find the right PCB rack for your boards, the first time.

Enter your board size or the part number you use now. See the right rack and its price in seconds.

Units
Hottest process
Your boards
ESD-safe, always
B0103GN-80C ESD PCB magazine rack loaded with boards on an ESD bench
Ships from the US
Conductive and ESD safe
Most racks ship in 24 hours
20+ magazine racks, 10% off

Keep your part number. Upgrade your rack.

Type the number on the rack you use today and see ours for the same boards, priced and ready to ship.

NikkoNK Cert 0525R / 0531R / 0539R / 0546RB0103GN-80CReplacement$188.00eachOne difference: rated 80 °C (176 °F) against their 135 °C (275 °F). The same size comes rated 200 °C (392 °F) for a hotter bake.FancortMagazine Rack BG SeriesB0103GN-80CDirect replacement$188.00eachFancortRA-18RA-18CDirect replacement$35.10per rackFancortRA-18RA-24 MiniReplacement$34.70per rackOne difference: takes larger boards, up to 400 × 220 mm (15.75″ × 8.66″) against 320 × 180 mm (12.60″ × 7.09″).FancortRA-24RA-24 MiniReplacement$34.70per rackOne difference: smaller overall, 435 × 160 mm (17.13″ × 6.30″) against 23″ × 8.375″ (584 × 213 mm).FancortRA-20RA-20CReplacement$41.90per rackOne difference: 25 slots against their 20.FancortAngle Rack PCBHPCBH-CDirect replacement$32.50per rackElcomPCB Rack, 25 boardsPCBH-CReplacement$32.50per rackOne difference: 265 mm (10.43″) long against their 260 mm (10.24″).FancortESD Turntable D380D380Direct replacement$133.00eachFancortESD Turntable D500D500Direct replacement$192.00eachElcomPCB Rack, 30 boardsPCBH-2L-CReplacement$37.60per rackOne difference: holds 25 boards against their 30.

Not sure it fits? Send the part number or a drawing, and an engineer confirms the fit before you order.

Type your part number in the finder →

PCB magazine racks by board size

50 slots. Adjust to the board. Feed your SMT loader.

Shop by type: ESD PCB storage racks · ESD PCB trays · Conductive PCB racks

B0103 ESD PCB magazine rack B0103 · 80 to 300 °C 355 × 250 mm Boards up to 13.98″ × 9.84″ From $188.00 B0104 ESD PCB magazine rack B0104 · Screw clamp 355 × 250 mm Boards up to 13.98″ × 9.84″ From $188.00 B0105 ESD PCB magazine rack B0105 · Lightest 355 × 250 mm Boards up to 13.98″ × 9.84″ From $179.00 B0106 ESD PCB magazine rack B0106 · 80 to 300 °C 460 × 330 mm Boards up to 18.11″ × 12.99″ From $257.00 B0108 ESD PCB magazine rack B0108 · 80 to 200 °C 535 × 390 mm Boards up to 21.06″ × 15.35″ From $336.00 B0109 ESD PCB magazine rack B0109 · 80 to 300 °C 535 × 460 mm Boards up to 21.06″ × 18.11″ From $416.00 B0110 ESD PCB magazine rack B0110 · Extra long 620 × 460 mm Boards up to 24.41″ × 18.11″ From $695.00

Fixed-slot PCB racks and holders

RA-20C ESD PCB rack RA-20C · Transport and bench 400 × 220 mm Boards up to 15.75″ × 8.66″ $41.90 per rack, pack of 10 RA-16C ESD PCB rack RA-16C · Standard boards 400 × 260 mm Boards up to 15.75″ × 10.24″ $35.40 per rack, pack of 10 RA-24 Mini ESD PCB rack RA-24 Mini · Thick or populated 400 × 220 mm Boards up to 15.75″ × 8.66″ $34.70 per rack, pack of 10 RA-18C ESD PCB rack RA-18C · Carry handles 320 × 180 mm Boards up to 12.60″ × 7.09″ $35.10 per rack, pack of 10 Karry-All 35 ESD PCB rack Karry-All 35 · Box or tote carrier 350 × 175 mm Boards up to 13.78″ × 6.89″ $44.90 per rack, pack of 10 PCBH-2L-C ESD PCB rack PCBH-2L-C · Inspection angle 305 × 203 mm Boards up to 12″ × 8″ $37.60 per rack, pack of 10 PCBH-C ESD PCB rack PCBH-C · Bench holder 152 × 152 mm Boards up to 6″ × 6″ $32.50 per rack, pack of 10

ESD turntables

D380 ESD turntable D380 · Carries up to 91 kg (200 lb) 380 mm surface 14.96″ across, turns a full 360° $133.00 D500 ESD turntable D500 · Carries up to 113 kg (250 lb) 500 mm surface 19.69″ across, turns a full 360° $192.00

How to choose a PCB rack in four questions

Answer these and you have your part number. The finder above asks them for you.

1

How big is the board?

Measure the long and the short edge. Take the smallest rack that clears both, so boards sit square and the rack stays light. Boards narrower than 50 mm (1.97″) need a belt rack, which closes to 10 mm (0.394″).

2

How hot does it get?

80 °C (176 °F) covers storage, transport and the SMT line. Moisture bake needs a 200 °C (392 °F) rack. Reflow, cure and stress testing need the all-aluminum 300 °C (572 °F) GL HT.

3

Does it feed a machine?

If the rack loads an SMT line, it adjusts to the board: gear for most lines, belt for narrow and mixed widths, screw clamp when one width runs a whole program. For holding, carrying and storing, a fixed-slot rack costs less.

4

Is it populated?

Populated, thick or warped boards need room. The GL HT has a 7.5 mm (0.295″) slot and the RA-24 Mini a 7.7 mm (0.303″) deep slot. When parts stand taller than the gap between boards, use every other slot.

Use the finder

What comes with every order

Buying the right rack should be the easy part of your week.

The right part, confirmedNot sure? An engineer confirms your part number before you order.

Spec sheets and drawingsFor every rack, free with a short form.

Volume pricing, automatic5+ packs save 5%, 10+ packs 10%, 20+ magazine racks 10%. No code.

Reorder planPut eligible racks on a schedule and save 10% on every delivery.

Spares that fitWear kits and spare parts for every chassis we sell.

Arrives rightDead on arrival? We replace it.

Order the way your company buys

Card today, or a PO and terms. The cart can go to whoever places the order.

Pay by card Card, PayPal, Apple Pay or ACH at checkout.Find my rack
Order through purchasing Send the list, the prices and a link to your cart to whoever places the order.
PO or terms A formal quote with your cart already filled in. Terms are offered.

Questions

Ask Sam. Answers in seconds.

Sam is our spec engineer: sizes, part numbers, ESD, shipping. Tap a question or type your own.

Read all the answers

What size PCB magazine rack do I need?

Take the smallest rack whose largest board clears both edges of yours. Sizes run from 355 × 250 mm (13.98″ × 9.84″) on the B0103 to 620 × 460 mm (24.41″ × 18.11″) on the B0110.

What is the largest board a PCB rack can hold?

The B0110 racks take boards up to 620 × 460 mm (24.41″ × 18.11″), with gear or belt adjustment. Like every rack, they ship from the US in under 24 hours when in stock.

Which PCB rack can go in a bake oven?

A GM rack for moisture bake to 200 °C (392 °F), or an all-aluminum GL HT rack to 300 °C (572 °F). Standard 80 °C (176 °F) racks stay out of the oven.

Can your rack replace the one I use now?

Yes. Type the part number from your current rack in the finder and it shows ours for the same boards. If yours is not there yet, send it and an engineer matches it, usually the same day.

Are your PCB racks ESD-safe?

Yes, every one. They are conductive, 10⁴ to 10⁶ Ω, so static drains to ground instead of sitting on your boards.

How fast do racks ship?

In-stock racks ship from the US in under 24 hours. When a rack is not on the shelf, the longest wait is 2 to 4 weeks, depending on quantity.

Which ESD turntable do I need?

The D380 has a 380 mm (14.96″) surface and carries up to 91 kg (200 lb). The D500 has a 500 mm (19.69″) surface and carries up to 113 kg (250 lb). Pick the one your assembly sits on.

Do you ship outside the US?

Yes. Email info@pcbracks.com before you order and we help with shipping, duties and paperwork.

Still not sure which one?

Send the size or a drawing. An engineer names the rack, usually the same day.

Find my rack Talk to an engineer