B0110GC BELT-80C ESD PCB magazine rack, three-quarter view: black conductive side panels, aluminum pillars and steel base; 50 slots, 10 mm (0.394 in) pitch, belt adjust 10 to 460 mm (0.394 to 18.11 in), rated 80 °C (176 °F)
Magazine Rack · 50 Slots · Belt-Adjustable · 80 °C · 10 mm (0.394″) Min Width · Extra-Long Format

B0110GC BELT-80C · 50-Slot Belt-Adjustable ESD PCB Magazine Rack

B0110GC BELT-80C80 °CSpecial order · lead time about 2 to 4 weeks, depending on quantity

The B0110GC BELT-80C is a 50-slot ESD-safe PCB magazine rack with continuous-belt width adjustment, rated −20 °C to +80 °C (−4 °F to 176 °F). Slot pitch is 10 mm (0.394″), board width adjusts from 10–460 mm (0.394″–18.11″). It ships from the US and fits standard in-line SMT loaders.

External dimensions (L × W × H)25″ × 21″ × 22″ 630 × 530 × 563 mm (24.80″ × 20.87″ × 22.17″)
$955.00 per unit
  • Adjustable Width: 10–460 mm (0.394″–18.11″)
  • Slot Count / Pitch: 50 @ 10 mm (0.394″)
  • Max Board (L × W): 620 × 460 mm (24.41″ × 18.11″)
  • Temp Range: −20 / +80 °C
Ask an engineer
Add to a bulk quote instead

Replacing another maker's part? Cross-reference your part number →

Spec sheet (PDF)Drawings / CAD (by email)
ESD-safe Ships from the USA Spec help included
Buying for the whole line? 20+ racks take 10% off, automatic →

At a glance

External dimensions (L × W × H)25″ × 21″ × 22″
630 × 530 × 563 mm (24.80″ × 20.87″ × 22.17″)
Adjustable Width10–460 mm (0.394″–18.11″)
Slot Count / Pitch50 @ 10 mm (0.394″)
Max Board (L × W)620 × 460 mm (24.41″ × 18.11″)
Temp Range−20 / +80 °C

Narrow Flex AND Full Backplanes on One Rack.

B0110GC BELT-80C loaded with boards

Gear-track racks bottom out at 50 mm (1.97″) board width. The belt-adjustable B0110GC BELT-80C on the extra-long-format chassis covers the full 10–460 mm (0.394″–18.11″) range continuously, the longest board format in the catalog. 10 mm (0.394″) flex circuits, 50 mm (1.97″) daughter cards, and 460 mm (18.11″) backplanes all run on the same rack inventory.

10 mm (0.394″) min width

460 mm (18.11″) max width

Longest board format

SMT loader compatible

Description

External dimensions (L × W × H): 25″ × 21″ × 22″ · 630 × 530 × 563 mm (24.80″ × 20.87″ × 22.17″)

How belt adjustment works on your line

The B0110GC BELT-80C is an extra-long-format 50-slot ESD magazine rack with continuous belt-driven width adjustment. A hand-driven belt rotates pulleys at the top and bottom of the chassis, turning two captive lead screws in unison, both side panels travel toward or away from each other on the same revolution. The adjustment is continuous (no stepped clicks, no fixed indices), so any board width from 10 mm (0.394″) to 460 mm (18.11″) is reachable on a single rack, the longest board format in the catalog.

Construction: 2 interchangeable Conductive PS side panels, aluminum pillars, galvanized steel base, and 2 H-type stopper plates (vs. the single stopper bar on gear-track variants). The slot is 5 mm (0.197″) wide × 4 mm (0.157″) deep, for tighter board retention through inline conveyor handling. Surface resistance stays in the 10⁴–10⁶ Ω dissipative band under ANSI/ESD S541.

Designed for the standard 80 °C ambient envelope (transport, storage, soldering, inspection, cleaning). There is no bake-rated version on the extra-long chassis: for bake or cure cycles the B0109GM-200C (200 °C) and B0109GL HT-300C (300 °C all-aluminum) cover boards to 535 × 460 mm (21.06″ × 18.11″). For indexed, repeatable width settings on the same extra-long chassis, see the B0110GN-80C.

Buying for a line? 20 or more racks, any mix from the magazine rack family, take 10% off automatically at checkout. See our volume and fleet pricing.

B0110GC BELT-80C ESD PCB magazine rack, three-quarter view: black conductive side panels, aluminum pillars and steel base; 50 slots, 10 mm (0.394 in) pitch, belt adjust 10 to 460 mm (0.394 to 18.11 in), rated 80 °C (176 °F)
FIG. 2B0110GC BELT-80C

B0110GC BELT-80C · Technical specifications

ModelB0110GC BELT-80C
MaterialsConductive PS side panels (2 × interchangeable) · aluminum pillars · galvanized steel base
Dimensions (L × W × H)630 × 530 × 563 mm (24.80″ × 20.87″ × 22.17″)
Slot count50
Slot width5 mm (0.197″)
Slot depth4 mm (0.157″)
Slot pitch10 mm (0.394″)
Adjustable board width10–460 mm (0.39″–18.11″) via belt (continuous, no stepped increments), the longest board format in the catalog
Max board length620 mm (24.41″)
Max board size (L × W)620 × 460 mm (24.41″ × 18.11″)
Min board size (L × W)50 × 10 mm (1.97″ × 0.394″), 5× narrower than gear-track
Reference positionsA = 34 mm (1.34″) · B = 34 mm (1.34″)
ESD propertiesSurface resistance 10⁴ – 10⁶ Ω (dissipative band per ANSI/ESD S541)
ESD test resultsNASTC Report 2025AS4693AP (Nov 2025): point-to-point 3.24 × 10⁴ Ω · ground 4.86 × 10⁴ Ω · surface −7 V (spec < 100 V) · decay 0.2 s (spec ≤ 2 s), ALL PASS
Temperature range−20 °C to +80 °C (−4 °F to 176 °F)
Adjustment typeBelt (continuous, no stepped increments)
Includes2 H-type stopper plates · carrying handles (top and bottom)
Weight16 kg (35.3 lb)
PartB0110GC BELT-80CRev2026-AUnitsmm / °CVerifiedNov 2025
Documentation Download spec sheet (PDF)

Need drawings or CAD models? Request them by email

Against the alternatives

FeatureB0110GN-80CB0110GC BELT-80CB0109GN-80C
Temperature rating−20 °C to +80 °C (−4 °F to 176 °F)−20 °C to +80 °C (−4 °F to 176 °F)−20 °C to +80 °C (−4 °F to 176 °F)
Width adjustmentGear track, parallelism monitoredContinuous belt, no stepped indicesGear track, parallelism monitored
MSD bake per J-STD-033No. Transfer to a bake-rated rack firstNo. Transfer to a bake-rated rack firstNo. Transfer to a bake-rated rack first
FrameConductive PS panels · aluminum pillars · steel baseConductive PS panels · aluminum pillars · steel baseConductive PPE panels · aluminum pillars · steel base
Pick this one whenStandard storage, transport and in-line SMT handling.Belt-set widths for mixed board runs.Standard storage, transport and in-line SMT handling.
PartB0110GC BELT-80C

Built for ESD-protected workstations

Materials: 2 × Conductive PS side panels · aluminum pillars · galvanized steel base · 2 H-type stoppers

Surface res.: 10⁴ – 10⁶ Ω, dissipative band per ANSI/ESD S541

NASTC test: Report 2025AS4693AP (Nov 2025), point-to-point, ground, voltage, decay all PASS

Thermal range: −20 °C to +80 °C, standard SMT envelope

Capacity: 50 slots · 10 mm (0.394″) pitch · 10–460 mm (0.394″–18.11″) adjustable · max board 620 × 460 mm (24.41″ × 18.11″)

RoHS: PASS, EU Directive (EU) 2015/863. Verified by SGS Report No. NGBEC25007648601 (1 Dec 2025). All 20 components tested, Pb, Hg, Cd, Cr⁶⁺, PBB, PBDE, DEHP, BBP, DBP, DIBP all PASS.

ESD: NASTC Report 2025AS4693AP, tested per SJ/T 10694-2022 and WJ 2146-2016 by MII Anti-Static Products Quality Supervision and Testing Center.

Best for: Mixed board widths (10–460 mm (0.394″–18.11″)) · narrow flex circuits · small-format panels · extra-long-format backplanes / motherboards · SMT in-line automation.

Why buy: Aerospace-grade build, special order with a 2 to 4 week lead time, shipped from the US, the B0110 extra-long pair (GN / GC BELT) sharing one footprint, mix variants on one purchase order with the same logistics, same compliance package, same volume tier.

Standards referenced

ANSI/ESD S541
The ESD Association standard for packaging materials in an EPA. It classifies surface resistance into conductive (below 10⁴ Ω), dissipative (10⁴ to below 10¹¹ Ω) and insulative bands. Our measured 10⁴–10⁶ Ω sits in the dissipative band, the range specified for board handling.
RoHS (EU) 2015/863
The EU restriction on hazardous substances in electrical equipment: lead, mercury, cadmium, hexavalent chromium, PBB, PBDE and four phthalates. All 20 components of this product were tested and passed (SGS report NGBEC25007648601).

Full IPC and ESD standards reference for handling, storage and depaneling →

What's in the box

  • Sold individually. Packaging size 650 × 570 × 120 mm (25.59″ × 22.44″ × 4.72″) at 16 kg (35.3 lb) gross. Special order: built for your order and shipped from the US, lead time about 2 to 4 weeks depending on quantity. Includes 2 H-type stopper plates and carrying handles (top + bottom).
Exploded view of a PCB magazine rack: two slotted side panels, top and bottom plates, four rails, screws and washers
Everything in the carton, laid out. The rack ships flat and goes together with the supplied screws.

Volume pricing

QuantityPrice per unitYou save
1–19 racks$955Factory-direct price
20+ racks$859.5010%
Volume discounts apply automatically in cartOutfitting a line? Get a fleet quote5+ packs (50+ racks)? Distributor pricing

Further reading

Engineers also bought

B0110GN-80C80 °C

B0110GN-80C · 50-Slot Gear-Adjustable ESD PCB Magazine Rack

50-slot ESD magazine rack on the extra-long-format chassis, sized for the longest boards in the catalog: backplanes, motherboards, and oversized industrial PCBs up to 620 × 460 mm (24.41″ × 18.11″).

External dimensions (L × W × H) 25″ × 21″ × 22″ 630 × 530 × 563 mm (24.80″ × 20.87″ × 22.17″)
Max board size (L × W) 24″ × 18″ 620 × 460 mm (24.41″ × 18.11″)
Gear track ESD-Safe$695.00
View
B0109GC BELT-80C80 °C

B0109GC BELT-80C · 50-Slot Belt-Adjustable ESD PCB Magazine Rack

50-slot ESD magazine rack on the maximum-format chassis, with continuous belt adjustment covering 10–460 mm (0.394″–18.11″) of board width.

External dimensions (L × W × H) 21″ × 21″ × 22″ 535 × 530 × 563 mm (21.06″ × 20.87″ × 22.17″)
Max board size (L × W) 21″ × 18″ 535 × 460 mm (21.06″ × 18.11″)
Continuous belt ESD-Safe$541.00
View
B0106GC BELT-80C80 °C

B0106GC BELT-80C · 50-Slot Belt-Adjustable ESD PCB Magazine Rack

50-slot ESD magazine rack on the large-format chassis, with continuous belt adjustment covering 10–330 mm (0.394″–12.99″) of board width, no stepped clicks, no fixed indices.

External dimensions (L × W × H) 18″ × 16″ × 22″ 460 × 400 × 563 mm (18.11″ × 15.75″ × 22.17″)
Max board size (L × W) 18″ × 13″ 460 × 330 mm (18.11″ × 12.99″)
Continuous belt ESD-Safe$427.00
View

Questions engineers ask

Belt vs. gear-track adjustment, which one do I pick?
Pick belt (this rack) when board widths vary across the full range, 10 mm (0.394″) flex circuits and 460 mm (18.11″) backplanes run on the same extra-long-format rack. The continuous adjustment hits any width without an indexing limit. Pick gear-track (B0110GN-80C) on the same extra-long chassis when board widths are standardized above 50 mm (1.97″) and you want indexed positions for repeatable setups. Trade-off: gear is slightly cheaper and lighter; belt covers the wider range and the narrow-flex use case.
Why is the slot 4 mm (0.157″) deep instead of 4 mm (0.157″)?
The deeper slot, 5 mm (0.197″) wide × 4 mm (0.157″) deep vs. 4 mm (0.157″) on gear-track variants, gives narrow flex circuits and small-format boards more retention surface during inline conveyor handling. Narrow boards have less mass, so they’re more vulnerable to walking out of a shallow slot during transport vibration. The extra 0.5 mm (0.020″) of slot depth keeps them seated.
Can I bake the B0110GC BELT-80C? What’s the temperature ceiling?
The GC BELT-80C variant is rated −20 °C to +80 °C, the standard SMT envelope (transport, storage, soldering, inspection, cleaning). There is no bake-rated version on the extra-long chassis. For bake-suitable use, the B0109GM-200C (200 °C) covers boards to 535 × 460 mm (21.06″ × 18.11″); for 300 °C cure, the B0109GL HT-300C all-aluminum rack, same 535 × 460 mm board size.
Will the B0110GC BELT-80C drop into my SMT loader / unloader?
The 563 mm (22.17″) chassis height and 10 mm (0.394″) slot pitch align with the standard interface used by ASM SIPLACE, Yamaha YSM, Panasonic NPM, Juki RS, and most other in-line SMT loader / unloader equipment, but the 630 × 530 mm (24.80″ × 20.87″) footprint is the longest in the catalog, many in-line loaders are not configured for extra-long racks out of the box. Confirm with your loader / unloader vendor before ordering. The 630 × 530 footprint matches the B0110GN-80C gear-track twin. The narrow-board capability does not change the loader interface, the loader still picks boards from the standard slot positions.
What are the H-type stopper plates, why two instead of a stopper bar?
Standard gear-track racks use a single stopper bar across the rear of the rack. The belt-adjustable B0110GC uses two H-shaped stopper plates instead, positioned to clear the belt and lead-screw assembly that runs across the rack interior. Function is identical (prevents boards from sliding through during transport); the H-shape just routes around the belt mechanism without interfering.
What ships in the box?
One B0110GC BELT-80C magazine rack, sold individually. Includes 2 H-type stopper plates and carrying handles (top and bottom). Packaging size 650 × 570 × 120 mm (25.59″ × 22.44″ × 4.72″) at 16 kg (35.3 lb) gross. Special order: built for your order and shipped from the US, lead time about 2 to 4 weeks depending on quantity. No assembly required.
Can I run anodized aluminum carriers or fixtures in this rack?
You can. The load path here is conductive PS side panels, the usual choice for bare boards. If you carry anodized aluminum carriers or fixtures and want no polymer touching them at all, the all-aluminum HT racks (B0109GL HT-300C, boards to 535 × 460 mm) replace every panel with clear anodized aluminum and stay in the conductive band at 104 to 106 ohms.
Is there a 3D model or STEP file for this rack?
Yes, on request. Dimensional drawings and CAD are not posted on the site, so ask through the documentation request page and the team sends the STEP model for this chassis.
Can you ship to our contract manufacturer or an overseas partner?
Yes. Racks ship FOB origin from the US, and we drop ship to a contract manufacturer, a loader vendor, or your own site abroad. Send the delivery address with the order, and if you have a carrier account we book the shipment on it. One order can go to more than one address.