How long is the cut?
Measure the longest V-score you need to separate. The VPD3-1M cuts up to 290 mm (11.42″), the VPD5-330 up to 330 mm (12.99″).
Depaneler Finder
Find the right V-cut depaneler for your panels, the first time.
Enter your panel length and board thickness, or the machine you run now. See the machine that cuts it clean and the blades that keep it cutting.
Units
How you run
The model name on the machine or on your last invoice works.
Your machine
V-scored FR4, 0.6 to 2.54 mm (0.024″ to 0.100″)
Blades and spares from US stock
1-year warranty on machines
An engineer answers the same day
Keep your process. Upgrade your machine.
Type the model you run today and see ours for the same panels, with blades and spares from US stock.
FancortVPD3-1M
VPD3-1MDirect replacementQuoteships in 3 days if in stockFancortVPD5-330
VPD5-330Direct replacementQuoteships in 3 days if in stockFancortVPD3-1S
VPD3-1SDirect replacement · motorizedQuoteships in 3 days if in stockcabMAESTRO 2VPD3-1MReplacementQuoteships in 3 days if in stockOne difference: cuts up to 290 mm (11.42″) against their 300 mm (11.81″).ManncorpSDM101VPD3-1MReplacementQuoteships in 3 days if in stockOne difference: a smaller cutting window, up to 290 mm (11.42″) long and 1.9 mm (0.075″) thick, against 445 mm (17.5″) and 3.0 mm (0.118″).FKN SystekK1010VPD3-1MReplacementQuoteships in 3 days if in stockOne difference: cuts V-scored FR4 only, not metal-core boards.FKN SystekK3000SVPD3-1MReplacementQuoteships in 3 days if in stockOne difference: cuts up to 290 mm (11.42″) against their 18″ (457 mm) panels.cabMAESTRO 2MVPD5-330ReplacementQuoteships in 3 days if in stockOne difference: pneumatic twin linear blades in place of a motor-driven cutter.
VPD3-1MDirect replacementQuoteships in 3 days if in stockFancortVPD5-330VPD5-330Direct replacementQuoteships in 3 days if in stockFancortVPD3-1S
VPD3-1SDirect replacement · motorizedQuoteships in 3 days if in stockcabMAESTRO 2VPD3-1MReplacementQuoteships in 3 days if in stockOne difference: cuts up to 290 mm (11.42″) against their 300 mm (11.81″).ManncorpSDM101VPD3-1MReplacementQuoteships in 3 days if in stockOne difference: a smaller cutting window, up to 290 mm (11.42″) long and 1.9 mm (0.075″) thick, against 445 mm (17.5″) and 3.0 mm (0.118″).FKN SystekK1010VPD3-1MReplacementQuoteships in 3 days if in stockOne difference: cuts V-scored FR4 only, not metal-core boards.FKN SystekK3000SVPD3-1MReplacementQuoteships in 3 days if in stockOne difference: cuts up to 290 mm (11.42″) against their 18″ (457 mm) panels.cabMAESTRO 2MVPD5-330ReplacementQuoteships in 3 days if in stockOne difference: pneumatic twin linear blades in place of a motor-driven cutter.Not sure it fits? Send the model or a panel drawing, and an engineer confirms the fit before you order.
Two V-cut depanelers, one for every line
Compare the PCB depaneling machines side by side →
Both cut pre-scored V-groove FR4. Pick by cut length, board thickness and how you run.
VPD3-1M · Manual
Cuts up to 290 mm (11.42″)
Boards 0.6 to 1.9 mm (0.024″ to 0.075″)
Hand lever, no air or power. Low mix, repair, prototypes.
Ships in under 3 business days if in stockMax lead time 2 to 4 weeks
VPD5-330 · Pneumatic
Cuts up to 330 mm (12.99″)
Boards 0.6 to 2.54 mm (0.024″ to 0.100″)
Foot pedal, twin linear blades, the least board stress. Production runs.
Ships in under 3 business days if in stockMax lead time 2 to 4 weeks
Need the VPD3 motorized? The VPD3-1S is available by quote →
Blades and spares
How to choose a PCB depaneler in four questions
Answer these and you have your machine. The finder above asks them for you.
How thick is the board?
Both machines cut from 0.6 mm (0.024″). The VPD3-1M goes to 1.9 mm (0.075″), the VPD5-330 to 2.54 mm (0.100″). The common 1.6 mm (0.062″) board fits both.
How do you run?
The hand-lever VPD3-1M suits low mix, repair and prototypes. The pneumatic VPD5-330 with its foot pedal suits production runs, cut after cut.
What sits near the score?
Parts close to the V-score feel the stress of the cut. The VPD5-330's twin linear blades put the least stress on the board.
What comes with every machine
A depaneler is a long-term tool. Here is what keeps it cutting.
The right machine, confirmedSend your panel and an engineer confirms the machine before you order.
1-year warrantyOn every machine.
Blades and spares from US stockTypically in stock, 10 working days at most.
Blade remindersTell us your cadence and we remind you before a dull edge reaches your boards.
Spec sheet and care guideFor your machine, free with a short form.
Ships fast from the USIn under 3 business days when in stock. Freight comes with your quote.
Order the way your company buys
Machines by quote, blades and spares by card. Either can go to whoever places the order.
Machine by quote
A formal quote with price and freight. PO and terms offered.
Get a machine quote
Blades and spares by card
Card, PayPal, Apple Pay or ACH at checkout.Find my blades
Order through purchasing
Send the list, the prices and a link to your cart to whoever places the order.
Questions
Ask Sam. Answers in seconds.
Sam is our spec engineer: sizes, part numbers, ESD, shipping. Tap a question or type your own.
Read all the answers
Which PCB depaneler do I need?
Measure the longest V-score and the board thickness. The VPD3-1M cuts up to 290 mm (11.42″) and boards 0.6 to 1.9 mm (0.024″ to 0.075″); the VPD5-330 cuts up to 330 mm (12.99″) and boards 0.6 to 2.54 mm (0.024″ to 0.100″).
What is the thickest board they cut?
The VPD5-330 cuts V-scored boards up to 2.54 mm (0.100″). The VPD3-1M goes to 1.9 mm (0.075″).
Is a V-cut depaneler an alternative to a laser?
For V-scored FR4 panels, yes. It separates along the score with no heat, no fumes and no char on the edge, at a fraction of the cost of a laser system. A laser earns its place on tab-routed, flex or unscored panels, which a V-cut machine does not cut.
Do they cut tab-routed or unscored panels?
No. Both cut pre-scored V-groove panels. For tab-routed or unscored boards, send us the panel and an engineer recommends the method.
How long does a machine take to arrive?
In under 3 business days when it is in stock, and 2 to 4 weeks at most when it is not. It ships from the US, with freight quoted on your PO.
How often do blades need changing?
It depends on the board material and your volume. Blades and spares ship from US stock, and the blade program reminds you before a dull edge reaches your boards.
Can your machine replace the one I run now?
Yes, for the models in our lookup. Type your model in the finder and it shows ours for the same panels. If yours is not there, send it and an engineer matches it, usually the same day.
Do you ship outside the US?
Yes. Email info@pcbracks.com before you order and we help with shipping, duties and paperwork.
Still not sure which machine?
Send the panel drawing. An engineer names the machine, usually the same day.