How long is the cut?
Measure the longest V-score you need to separate. The VPD3-1M cuts up to 290 mm (11.4″), the VPD5-330 up to 330 mm (13″).
Depaneler Finder
Looking for a rack? Use the rack finder →Find the right PCB depaneler for your panels.
Enter the model you run now, or your panel length and board thickness. Get the matching V-cut depaneler in seconds.
PCB depaneling machines for V-scored FR4: the manual VPD3-1M and the pneumatic VPD5-330, with their blades and spares.
1
Already run a depaneler?
Not in the list? An engineer matches it, usually the same day.
2
Buying for new panels?
Enter your panelUnits
Several panels? Enter the longest cut and the thickest board.
Ships from the USA
1-year warranty on machines
Quote within one business day
Domestic shipping
Free shipping on US orders of $1,000 and up.
Delivered to your dock, freight paid (DDP). It applies by itself at checkout, with no code. In stock ships in under 24 hours.
Under $1,000? Ship on your own UPS or FedEx account: tick the option in your cart and we ask you for the account number by email before anything ships. Or take the ground rate shown at checkout, priced by the weight of the order.
[ Shop by family ]
Every depaneler we stock,
with its blades.
Pick a family. Machines and starter kits show their cut and board range and go by quote; blades and spares are priced and ready to add to the cart.
Family 1
PCB depaneling machines: two V-cut depanelers, one for every line
Both are V-score cutters for pre-scored FR4 panels: the manual depaneling machine for low mix, the pneumatic one for production. Pick by cut length, board thickness and how you run.
How a V-cut depaneler works: the panel arrives V-scored, with a thin web of board left in each groove. The machine closes its blades on the score line and shears that web, so the boards come apart without the panel being bent.
- Ships in under 3 business days if in stock
- 1-year warranty on machines
- Quote within one business day
Depanelers and starter kits
The VPD3-1M for low mix, repair and prototypes. The VPD5-330 for production lines: twin linear blades, average board strain under 120 µε, measured with strain gauges.
VPD3-1MManual desktop depaneler: hand-drawn carriage, no air or power
- Cut length
- Up to 290 mm (11.4″)
- Board thickness
- 0.6 to 1.9 mm (0.024″ to 0.075″)
Ships in under 3 business days if in stock · USAMax lead time 2 to 4 weeks, depending on quantityGet a quote
VPD5-330Pneumatic, CE marked, built for EMS production lines
- Cut length
- Up to 330 mm (13″)
- Board thickness
- 0.6 to 2.54 mm (0.024″ to 0.100″)
Ships in under 3 business days if in stock · USAMax lead time 2 to 4 weeks, depending on quantityGet a quote
VPD3-1M Starter KitMachine and a spare set of blades
- Cut length
- Up to 290 mm (11.4″)
- In the box
- VPD3-1M, spare circular and linear blade
Ships in under 3 business days if in stock · USAMax lead time 2 to 4 weeks, depending on quantityGet a quote
VPD5-330 Starter KitMachine and a spare set of blades
- Cut length
- Up to 330 mm (13″)
- In the box
- VPD5-330, spare linear blade pair
Ships in under 3 business days if in stock · USAMax lead time 2 to 4 weeks, depending on quantityGet a quote
Need the VPD3 motorized? The VPD3-1S is available by quote →
Not sure which machine? Enter your panel size · Compare the machines side by side
Family 2
Blades and spares
Blades and spare parts for both machines, for machines bought anywhere, shipped from the US.
VPD3-1M blades
The circular blade rides over the stationary linear blade: the two halves of the shear.
VPD3-1M Blade Pair KitBoth blades, changed together
- Fits
- VPD3-1M
- Part
- Circular and linear blade
$1,913.00
Typically in stock · USAVPD5-330 blades and spares
The matched linear blade pair and the parts the operator touches every shift.
VPD5-330LKMatched pair, replaced as a set
- Fits
- VPD5-330
- Part
- Linear blade set
$2,280.00
Typically in stock · USANot sure which blade? Pick your machine · Every blade and spare
Compare by brand
Run another brand? See our match.
Pick the brand you run today. Each line shows their model and our V-cut depaneler for the same panels, one click away.
VPD3-1M
VPD3-1MSame fit
Quoteships in 3 days if in stock
VPD5-330
VPD5-330Same fit
Quoteships in 3 days if in stock
VPD3-1S (motorized)
VPD3-1SSame fit, by quote
Quoteships in 3 days if in stock
MAESTRO 2
VPD3-1MOne difference: cuts up to 290 mm (11.4″) against their 300 mm (11.81″).
Quoteships in 3 days if in stock
MAESTRO 2M
VPD5-330One difference: pneumatic twin linear blades in place of a motor-driven cutter.
Quoteships in 3 days if in stock
Not on the list? Type your model in the finder, or send the model, or your panel length and board thickness, and an engineer confirms the fit before you order.
Order the way your company buys
Machines by quote, blades and spares by card. Either can go to whoever places the order.
Machine by quote
A formal quote with price and freight. Pay by card or by PO; W-9 and vendor packet by email.
Get a machine quote
Blades and spares by card
Card, PayPal, Apple Pay or ACH at checkout.Find my blades
Order through purchasing
Send the list, the prices and a link to your cart to whoever places the order.
VPD3-1M
Manual V-Cut PCB Depaneling Machine
Quoted with a ship date
- Maximum Cut Length
- 290 mm (11.4″)
- Board Thickness
- 0.6 to 1.9 mm (0.024″ to 0.075″)
- Parts Near the Score
- Down to 2 mm (0.079″)
- Component Height
- 33 mm (1.299″) top, 25.4 mm (1.000″) bottom
- Score Depth
- Over 0.25 mm (0.010″)
- Utilities
- None: no air, no electrical
- Machine Size
- 784 × 460 × 530 mm (30.87″ × 18.11″ × 20.87″), 35 kg (77 lb)
VPD5-330
Pneumatic V-Cut PCB Depaneling Machine
Quoted with a ship date
- Maximum Cut Length
- 330 mm (13 in)
- Board Thickness
- 0.6 to 2.54 mm (0.024″ to 0.100″)
- Parts Near the Score
- Down to 0.5 mm (0.020″)
- Component Height
- 20 mm (0.787″) top and bottom
- Air Supply
- 0.4 to 0.6 MPa (58 to 87 psi), no electrical
- Machine Size
- 750 × 230 × 395 mm (29.5″ × 9.1″ × 15.6″), about 125 kg (275 lb)
- Certification
- CE marked
VPD3-1M Starter Kit
Manual Depaneler with Spare Blades
Quoted with a ship date
- Machine
- VPD3-1M manual depaneler: 290 mm (11.4″) cut, no air or power
- Spare Blades
- VPD3-1CB circular and VPD3-1LB linear
- Blade Program
- We track blade life on your schedule and remind you before a blade dulls
- Care Guide
- Blade changes, a weekly scrap-panel check and cleaning
- Freight
- One quote for the machine and blades together
VPD5-330 Starter Kit
Pneumatic Depaneler with Spare Blades
Quoted with a ship date
- Machine
- VPD5-330 pneumatic depaneler: 330 mm (13″) cut, foot pedal, CE marked
- Spare Blades
- VPD5-330LK matched linear blade pair
- Blade Program
- We track blade life on your schedule and remind you before edge quality drifts
- Care Guide
- Blade changes, a weekly scrap-panel check and air-supply care
- Freight
- One quote for the machine and blades together
VPD5-330-P13
Handle Assembly for VPD5-330
$209.00 each
Typically in stock. Ships from the USA.
- Material
- Anodized aluminum and steel
- Mount
- Single bolt, one hex wrench
- Fits
- VPD5-330
- Replacement
- At the bench, no service call
VPD5-330-P04
Pneumatic Foot Pedal Switch for VPD5-330
$447.00 each
Typically in stock. Ships from the USA.
- Type
- Pneumatic foot switch
- Air
- Standard shop air, 0.4 to 0.6 MPa (58 to 87 psi)
- Fits
- VPD5-330
- Replacement
- At the bench, no service call
VPD3-1CB
Circular Blade for VPD3-1M
$758.00 each
Typically in stock. Ships from the USA.
- Thickness
- 5.5 mm (0.217″)
- Edge Angle
- 20°
- Material
- Tool steel
- Blade Life
- Up to 100,000 cycles per blade on FR4, 50,000 or more typical
- Fits
- VPD3-1M
- Replacement
- At the bench, by your own team
VPD3-1LB
Stationary Linear Blade for VPD3-1M
$1,367.00 each
Typically in stock. Ships from the USA.
- Type
- Stationary linear V-blade
- Profile
- Standard profile included; custom profiles on request
- Material
- Tool steel
- Blade Life
- Up to 100,000 cycles per blade on FR4, 50,000 or more typical
- Fits
- VPD3-1M
- Replacement
- At the bench, by your own team
VPD3-1CB + VPD3-1LB
Replacement Circular + Linear Blades
$1,913.00 per pair
Typically in stock. Ships from the USA.
- Contents
- VPD3-1CB circular blade and VPD3-1LB linear blade
- Material
- Tool steel
- Blade Life
- Up to 100,000 cycles per blade on FR4, 50,000 or more typical
- Fits
- VPD3-1M
- Price
- 10% under buying the two separately
VPD5-330LK
Replacement Linear Blade Pair for VPD5-330
$2,280.00 per pair
Typically in stock. Ships from the USA.
- Type
- Matched upper and lower linear V-blades
- Material
- Precision-ground tool steel
- Blade Life
- Up to 100,000 cycles per blade on FR4, 50,000 or more typical
- Fits
- Every VPD5-330, wherever it was bought
- Replacement
- At the bench, no service call
5%
Every order gives back.
5% of every dollar we earn goes to charities supporting children, veterans and people recovering from addiction.
ChildrenVeteransRecovery
More than a business →
[ Questions ]
PCB depaneling machine questions
and answers.
Choosing a depaneler
How to choose a PCB depaneling machine in four questions
Answer these and you have your machine. The finder above asks them for you.
How thick is the board?
Both machines cut from 0.6 mm (0.024″). The VPD3-1M goes to 1.9 mm (0.075″), the VPD5-330 to 2.54 mm (0.100″). The common 1.6 mm (0.062″) board fits both.
How do you run?
The hand-lever VPD3-1M suits low mix, repair and prototypes. The pneumatic VPD5-330 with its foot pedal suits production runs, cut after cut.
What sits near the score?
Parts close to the V-score feel the stress of the cut. On the VPD5-330 they can sit 0.5 mm (0.020″) from the score, ceramic capacitors included, with average board strain under 120 µε, measured with strain gauges. On the VPD3-1M keep them 2 mm (0.079″) away, or use the Shape C blade when parts cross the score.
Which PCB depaneling machine fits my panels?
Measure the longest V-score and the board thickness. Up to 290 mm (11.4″) long and 1.9 mm (0.075″) thick, both machines cut it: the VPD3-1M for low mix, the VPD5-330 for production. From 290 to 330 mm (11.4″ to 13″) long, or from 1.9 to 2.54 mm (0.075″ to 0.100″) thick, it is the VPD5-330. The common 1.6 mm (0.062″) board fits both. Outside that window, send the length and thickness and an engineer recommends the method.
What is the difference between a manual and a pneumatic PCB depaneling machine?
On the manual VPD3-1M the operator draws a circular blade by hand over a stationary linear blade. It needs no air and no power, cuts up to 290 mm (11.4″) and takes boards 0.6 to 1.9 mm (0.024″ to 0.075″) thick. On the pneumatic VPD5-330 a foot pedal closes two linear blades on the score. It cuts up to 330 mm (13″), takes boards 0.6 to 2.54 mm (0.024″ to 0.100″) thick and holds average board strain under 120 µε, measured with strain gauges. The manual machine suits low mix, repair and prototypes. The pneumatic one suits production runs.
Is a V-cut depaneler an alternative to a laser?
For V-scored FR4 panels, yes. It separates along the score with no heat, no fumes and no char on the edge, at a fraction of the cost of a laser system. A laser earns its place on tab-routed, flex or unscored panels, which a V-cut machine does not cut. Four methods compared.
About the machines
Who uses a PCB depaneling machine?
Electronics manufacturers that build boards in V-scored panels: aerospace and defense, automotive electronics, medical devices and contract manufacturing. After assembly, the depaneler separates the boards along the score in place of snapping the panel by hand.
How often do blades need changing?
Up to 100,000 cycles per blade on FR4, 50,000+ typical. Actual life varies with panel material, thickness and score depth. Blades ship from the USA, typically from stock, free on US orders of $1,000 and up, and the blade program reminds you before a dull edge reaches your boards.
Can your machine replace the one I run now?
Yes, for the models in our lookup. Type your model in the finder and it shows ours for the same panels. If yours is not there, send it and an engineer matches it, usually the same day.
Do they cut tab-routed or unscored panels?
Both machines cut pre-scored V-groove panels. For tab-routed or unscored boards, tell us the board size and thickness and an engineer recommends the method.
Buying and shipping
What comes with every PCB depaneling machine?
A depaneler is a long-term tool. Here is what keeps it cutting.
PCBRacks.com is a US-based OEM of ESD-safe PCB racks and V-cut depaneling machines for electronics manufacturers. Our racks keep boards safe from static and handling damage between process steps, and our depanelers separate panels without cracking the parts. Racks in stock ship from the USA in under 24 hours. Industries we serve: aerospace and defense, automotive electronics, medical devices and contract manufacturing.
The right machine, confirmedTell us the panel length and board thickness, and an engineer confirms the machine before you order.
1-year warrantyOn every machine.
Blades and spares from US stockTypically in stock.
Blade remindersTell us your cadence and we remind you before a dull edge reaches your boards.
Spec sheet and care guideFor your machine, free with a short form.
Ships fast from the USIn under 3 business days when in stock. Freight comes with your quote.
How much does a PCB depaneling machine cost, and how do I buy one?
Both machines are sold by quote. Tell us the panel length and board thickness and you get a formal quote with price and freight within one business day. Pay by card or by PO; W-9 and vendor packet by email. Machines ship from the USA in under 3 business days if in stock, 2 to 4 weeks at most, with a 1-year warranty. Blades and spares are priced on the page and bought by card: the VPD3-1M Blade Pair Kit is $1,913.00 and the VPD5-330LK blade pair is $2,280.00.
How long does a machine take to arrive?
In under 3 business days when it is in stock, and 2 to 4 weeks at most when it is not. It ships from the US, with freight quoted on your PO.
Do you ship outside the US?
Yes. Orders up to 70 lb (32 kg) check out online and ship to Canada and Mexico. Heavier orders, and orders for other countries, go on a PO with your carrier account or the shipping method you choose. Email info@pcbracks.com before you order and we help with the paperwork.
VPD3-1M
Manual V-Cut PCB Depaneling Machine
Quoted with a ship date
- Maximum Cut Length
- 290 mm (11.4″)
- Board Thickness
- 0.6 to 1.9 mm (0.024″ to 0.075″)
- Parts Near the Score
- Down to 2 mm (0.079″)
- Component Height
- 33 mm (1.299″) top, 25.4 mm (1.000″) bottom
- Score Depth
- Over 0.25 mm (0.010″)
- Utilities
- None: no air, no electrical
- Machine Size
- 784 × 460 × 530 mm (30.87″ × 18.11″ × 20.87″), 35 kg (77 lb)
VPD5-330
Pneumatic V-Cut PCB Depaneling Machine
Quoted with a ship date
- Maximum Cut Length
- 330 mm (13 in)
- Board Thickness
- 0.6 to 2.54 mm (0.024″ to 0.100″)
- Parts Near the Score
- Down to 0.5 mm (0.020″)
- Component Height
- 20 mm (0.787″) top and bottom
- Air Supply
- 0.4 to 0.6 MPa (58 to 87 psi), no electrical
- Machine Size
- 750 × 230 × 395 mm (29.5″ × 9.1″ × 15.6″), about 125 kg (275 lb)
- Certification
- CE marked
VPD3-1M Starter Kit
Manual Depaneler with Spare Blades
Quoted with a ship date
- Machine
- VPD3-1M manual depaneler: 290 mm (11.4″) cut, no air or power
- Spare Blades
- VPD3-1CB circular and VPD3-1LB linear
- Blade Program
- We track blade life on your schedule and remind you before a blade dulls
- Care Guide
- Blade changes, a weekly scrap-panel check and cleaning
- Freight
- One quote for the machine and blades together
VPD5-330 Starter Kit
Pneumatic Depaneler with Spare Blades
Quoted with a ship date
- Machine
- VPD5-330 pneumatic depaneler: 330 mm (13″) cut, foot pedal, CE marked
- Spare Blades
- VPD5-330LK matched linear blade pair
- Blade Program
- We track blade life on your schedule and remind you before edge quality drifts
- Care Guide
- Blade changes, a weekly scrap-panel check and air-supply care
- Freight
- One quote for the machine and blades together
VPD5-330-P13
Handle Assembly for VPD5-330
$209.00 each
Typically in stock. Ships from the USA.
- Material
- Anodized aluminum and steel
- Mount
- Single bolt, one hex wrench
- Fits
- VPD5-330
- Replacement
- At the bench, no service call
VPD5-330-P04
Pneumatic Foot Pedal Switch for VPD5-330
$447.00 each
Typically in stock. Ships from the USA.
- Type
- Pneumatic foot switch
- Air
- Standard shop air, 0.4 to 0.6 MPa (58 to 87 psi)
- Fits
- VPD5-330
- Replacement
- At the bench, no service call
VPD3-1CB
Circular Blade for VPD3-1M
$758.00 each
Typically in stock. Ships from the USA.
- Thickness
- 5.5 mm (0.217″)
- Edge Angle
- 20°
- Material
- Tool steel
- Blade Life
- Up to 100,000 cycles per blade on FR4, 50,000 or more typical
- Fits
- VPD3-1M
- Replacement
- At the bench, by your own team
VPD3-1LB
Stationary Linear Blade for VPD3-1M
$1,367.00 each
Typically in stock. Ships from the USA.
- Type
- Stationary linear V-blade
- Profile
- Standard profile included; custom profiles on request
- Material
- Tool steel
- Blade Life
- Up to 100,000 cycles per blade on FR4, 50,000 or more typical
- Fits
- VPD3-1M
- Replacement
- At the bench, by your own team
VPD3-1CB + VPD3-1LB
Replacement Circular + Linear Blades
$1,913.00 per pair
Typically in stock. Ships from the USA.
- Contents
- VPD3-1CB circular blade and VPD3-1LB linear blade
- Material
- Tool steel
- Blade Life
- Up to 100,000 cycles per blade on FR4, 50,000 or more typical
- Fits
- VPD3-1M
- Price
- 10% under buying the two separately
VPD5-330LK
Replacement Linear Blade Pair for VPD5-330
$2,280.00 per pair
Typically in stock. Ships from the USA.
- Type
- Matched upper and lower linear V-blades
- Material
- Precision-ground tool steel
- Blade Life
- Up to 100,000 cycles per blade on FR4, 50,000 or more typical
- Fits
- Every VPD5-330, wherever it was bought
- Replacement
- At the bench, no service call