How big is the board?
Measure the long and the short edge. Take the smallest rack that clears both, so boards sit square and the rack stays light. Boards narrower than 50 mm (1.97″) need a belt rack, which closes to 10 mm (0.394″).
PCB Rack Finder
Find the right PCB rack for your boards, the first time.
Not sure which PCB rack you need? Enter your board size or the part number you use now, and see the right ESD PCB rack and its price in seconds.
or find it by your largest board
Units
Several boards? Enter the largest. Smaller ones fit the same rack down to 50 mm (1.97″) wide; narrower boards need a belt rack.
Ships from the US
Conductive and ESD safe
Most racks ship in 24 hours
20+ magazine racks, 10% off
Family 1
PCB magazine racks that feed your SMT line
ESD PCB racks for the SMT line: 50 slots, width-adjustable, they feed your loader and hold boards between steps. Rated 80 to 300 °C (176 to 572 °F): conductive PPE side panels on every rack up to 200 °C (392 °F), all-aluminum at 300 °C for reflow and bake.
- Zero board-on-board contact
- 50 slots per rack
- 20+ magazine racks save 10%, automatic
- Made for IPC board handling
- Bulk quote within one business day
Gear adjustment
The in-line industry standard: quick width changes for high-mix production. Rated 80, 120 or 200 °C (176, 248 or 392 °F).
B0103GN-80C
- Rack size
- 355 × 320 × 563 mm (13.98″ × 12.60″ × 22.17″)
- Max board
- 355 × 250 mm (13.98″ × 9.84″)
- Temperature
- Up to 80 °C (176 °F)
$188.00
En stock · expédition en moins de 24 h · États-Unis
B0106GN-80C
- Rack size
- 460 × 400 × 563 mm (18.11″ × 15.75″ × 22.17″)
- Max board
- 460 × 330 mm (18.11″ × 12.99″)
- Temperature
- Up to 80 °C (176 °F)
$257.00
En stock · expédition en moins de 24 h · États-Unis
B0109GN-80C
- Rack size
- 535 × 530 × 569 mm (21.06″ × 20.87″ × 22.40″)
- Max board
- 535 × 460 mm (21.06″ × 18.11″)
- Temperature
- Up to 80 °C (176 °F)
$416.00
Expédition en moins de 24 h si en stock · États-UnisDélai maximum de 2 à 4 semaines selon la quantité
B0110GN-80CLongest boards in the catalog
- Rack size
- 630 × 530 × 563 mm (24.80″ × 20.87″ × 22.17″)
- Max board
- 620 × 460 mm (24.41″ × 18.11″)
- Temperature
- Up to 80 °C (176 °F)
$695.00
Expédition en moins de 24 h si en stock · États-UnisDélai maximum de 2 à 4 semaines selon la quantitéScrew adjustment
Set the width once and run: built for high-volume, low-mix lines. Rated 80 or 200 °C (176 or 392 °F).
B0104N-80C
- Rack size
- 355 × 320 × 563 mm (13.98″ × 12.60″ × 22.17″)
- Max board
- 355 × 250 mm (13.98″ × 9.84″)
- Temperature
- Up to 80 °C (176 °F)
$188.00
En stock · expédition en moins de 24 h · États-Unis
B0104M-200COven-rated for moisture bake
- Rack size
- 355 × 320 × 563 mm (13.98″ × 12.60″ × 22.17″)
- Max board
- 355 × 250 mm (13.98″ × 9.84″)
- Temperature
- Up to 200 °C (392 °F)
$253.00
En stock · expédition en moins de 24 h · États-Unis
Karry-All 3530-slot carrier for a box or tote
- Rack size
- 350 × 175 × 355 mm (13.78″ × 6.89″ × 13.98″)
- Max board
- 350 × 175 mm (13.78″ × 6.89″)
- Temperature
- Up to 80 °C (176 °F)
$44.90 per rack · $449.00 pack of 10
En stock · expédition en moins de 24 h · États-UnisBelt adjustment
Continuous width adjustment down to 10 mm (0.394″), no steps, for narrow boards and fast changeovers. Rated 80 °C (176 °F).
B0103GC BELT-80C
- Rack size
- 355 × 320 × 563 mm (13.98″ × 12.60″ × 22.17″)
- Max board
- 355 × 250 mm (13.98″ × 9.84″)
- Temperature
- Up to 80 °C (176 °F)
$322.00
En stock · expédition en moins de 24 h · États-Unis
B0106GC BELT-80C
- Rack size
- 460 × 400 × 563 mm (18.11″ × 15.75″ × 22.17″)
- Max board
- 460 × 330 mm (18.11″ × 12.99″)
- Temperature
- Up to 80 °C (176 °F)
$427.00
En stock · expédition en moins de 24 h · États-Unis
B0109GC BELT-80C
- Rack size
- 535 × 530 × 563 mm (21.06″ × 20.87″ × 22.17″)
- Max board
- 535 × 460 mm (21.06″ × 18.11″)
- Temperature
- Up to 80 °C (176 °F)
$541.00
Expédition en moins de 24 h si en stock · États-UnisDélai maximum de 2 à 4 semaines selon la quantité
B0110GC BELT-80C
- Rack size
- 630 × 530 × 563 mm (24.80″ × 20.87″ × 22.17″)
- Max board
- 620 × 460 mm (24.41″ × 18.11″)
- Temperature
- Up to 80 °C (176 °F)
$955.00
Expédition en moins de 24 h si en stock · États-UnisDélai maximum de 2 à 4 semaines selon la quantitéHigh temperature
All-aluminum racks for 300 °C (572 °F) reflow and moisture bake.
B0103GL HT-300C
- Rack size
- 355 × 320 × 563 mm (13.98″ × 12.60″ × 22.17″)
- Max board
- 355 × 250 mm (13.98″ × 9.84″)
- Temperature
- Up to 300 °C (572 °F)
$282.00
En stock · expédition en moins de 24 h · États-Unis
B0106GL HT-300C
- Rack size
- 460 × 400 × 563 mm (18.11″ × 15.75″ × 22.17″)
- Max board
- 460 × 330 mm (18.11″ × 12.99″)
- Temperature
- Up to 300 °C (572 °F)
$356.00
En stock · expédition en moins de 24 h · États-Unis
B0109GL HT-300C
- Rack size
- 535 × 530 × 569 mm (21.06″ × 20.87″ × 22.40″)
- Max board
- 535 × 460 mm (21.06″ × 18.11″)
- Temperature
- Up to 300 °C (572 °F)
$519.00
Expédition en moins de 24 h si en stock · États-UnisDélai maximum de 2 à 4 semaines selon la quantitéNot sure which size? Enter your board size · Compare every model in one table
Family 2
Universal ESD PCB trays
Slotted-edge circuit board trays, also sold as universal PCB racks: 25 boards stand on edge in chemical-resistant conductive polypropylene. The RA-20C has a double slot at every one of its 25 positions.
- Packs of 10, no assembly
- Rated −10 to +80 °C (14 to 176 °F)
- 5+ packs save 5%, 10+ packs save 10%
- Made for IPC board handling
- Bulk quote within one business day
Slotted-edge trays
Standard, deep-slot, double-slot and carry-handle profiles, 25 boards each.
RA-16CStandard 1.6 mm (0.063″) boards
- Tray size
- 428 × 160 × 21 mm (16.85″ × 6.30″ × 0.83″)
- Max board
- 400 × 260 mm (15.75″ × 10.24″)
- Temperature
- Up to 80 °C (176 °F)
$35.40 per tray · $354.00 pack of 10
En stock · expédition en moins de 24 h · États-Unis
RA-18CHandles on both ends
- Tray size
- 480 × 140 × 35 mm (18.90″ × 5.51″ × 1.38″)
- Max board
- 320 × 180 mm (12.60″ × 7.09″)
- Temperature
- Up to 80 °C (176 °F)
$35.10 per tray · $351.00 pack of 10
En stock · expédition en moins de 24 h · États-Unis
RA-20CDouble slot, for production and storage
- Tray size
- 484 × 172 × 50 mm (19.06″ × 6.77″ × 1.97″)
- Max board
- 400 × 220 mm (15.75″ × 8.66″)
- Temperature
- Up to 80 °C (176 °F)
$41.90 per tray · $419.00 pack of 10
En stock · expédition en moins de 24 h · États-Unis
RA-24 MiniDeep slot, thick or populated boards
- Tray size
- 435 × 160 × 30 mm (17.13″ × 6.30″ × 1.18″)
- Max board
- 400 × 220 mm (15.75″ × 8.66″)
- Temperature
- Up to 80 °C (176 °F)
$34.70 per tray · $347.00 pack of 10
En stock · expédition en moins de 24 h · États-UnisNot sure which one? Enter your board size
Family 3
Angled PCB holders and ESD turntables
For the bench. Angled holders stand boards up for inspection and hand work. ESD turntables let you rotate boards at the rework or inspection bench instead of lifting them: a conductive rubber top that turns a full 360° on a smooth bearing.
- No assembly
- Holders in packs of 10: 5+ packs save 5%, 10+ packs save 10%
- Turntables: 10+ units save 10%
- Bulk quote within one business day
For the inspection and rework bench
Holders fan boards out at an angle so you read both sides without pulling one. Turntables spin the assembly so you work all 360°, no power, no air.
PCBH-CSingle wide
- Holder size
- 265 × 205 × 95 mm (10.43″ × 8.07″ × 3.74″)
- Max board
- 152 × 152 mm (6″ × 6″)
- Temperature
- Up to 80 °C (176 °F)
$32.50 per holder · $325.00 pack of 10
En stock · expédition en moins de 24 h · États-Unis
PCBH-2L-CDouble wide
- Holder size
- 355 × 270 × 130 mm (13.98″ × 10.63″ × 5.12″)
- Max board
- 305 × 203 mm (12″ × 8″)
- Temperature
- Up to 80 °C (176 °F)
$37.60 per holder · $376.00 pack of 10
En stock · expédition en moins de 24 h · États-Unis
D380Mid-size assemblies
- Surface
- 380 mm (14.96″) across
- Load
- Up to 91 kg (200 lb)
$133.00
En stock · expédition en moins de 24 h · États-Unis
D500Large assemblies
- Surface
- 500 mm (19.69″) across
- Load
- Up to 113 kg (250 lb)
$192.00
En stock · expédition en moins de 24 h · États-UnisNot sure which one? Enter your board size
Keep your part number. Upgrade your rack.
Type the number on the rack you use today and see ours for the same boards, priced and ready to ship.
NikkoNK Cert 0525R / 0531R / 0539R / 0546R
B0103GN-80CReplacement$188.00eachOne difference: rated 80 °C (176 °F) against their 135 °C (275 °F). The same size comes rated 200 °C (392 °F) for a hotter bake.FancortMagazine Rack BG SeriesB0103GN-80CDirect replacement$188.00eachFancortRA-18
RA-18CDirect replacement$35.10per rackFancortRA-18
RA-24 MiniReplacement$34.70per rackOne difference: takes larger boards, up to 400 × 220 mm (15.75″ × 8.66″) against 320 × 180 mm (12.60″ × 7.09″).FancortRA-24RA-24 MiniReplacement$34.70per rackOne difference: smaller overall, 435 × 160 mm (17.13″ × 6.30″) against 23″ × 8.375″ (584 × 213 mm).FancortRA-20
RA-20CReplacement$41.90per rackOne difference: 25 slots against their 20.FancortAngle Rack PCBH
PCBH-CDirect replacement$32.50per rackElcomPCB Rack, 25 boardsPCBH-CReplacement$32.50per rackOne difference: 265 mm (10.43″) long against their 260 mm (10.24″).FancortESD Turntable D380
D380Direct replacement$133.00eachFancortESD Turntable D500
D500Direct replacement$192.00eachElcomPCB Rack, 30 boards
PCBH-2L-CReplacement$37.60per rackOne difference: holds 25 boards against their 30.
B0103GN-80CReplacement$188.00eachOne difference: rated 80 °C (176 °F) against their 135 °C (275 °F). The same size comes rated 200 °C (392 °F) for a hotter bake.FancortMagazine Rack BG SeriesB0103GN-80CDirect replacement$188.00eachFancortRA-18RA-18CDirect replacement$35.10per rackFancortRA-18RA-24 MiniReplacement$34.70per rackOne difference: takes larger boards, up to 400 × 220 mm (15.75″ × 8.66″) against 320 × 180 mm (12.60″ × 7.09″).FancortRA-24RA-24 MiniReplacement$34.70per rackOne difference: smaller overall, 435 × 160 mm (17.13″ × 6.30″) against 23″ × 8.375″ (584 × 213 mm).FancortRA-20RA-20CReplacement$41.90per rackOne difference: 25 slots against their 20.FancortAngle Rack PCBHPCBH-CDirect replacement$32.50per rackElcomPCB Rack, 25 boardsPCBH-CReplacement$32.50per rackOne difference: 265 mm (10.43″) long against their 260 mm (10.24″).FancortESD Turntable D380D380Direct replacement$133.00eachFancortESD Turntable D500D500Direct replacement$192.00eachElcomPCB Rack, 30 boardsPCBH-2L-CReplacement$37.60per rackOne difference: holds 25 boards against their 30.Not sure it fits? Send the part number or a drawing, and an engineer confirms the fit before you order.
How to choose a PCB rack in four questions
Answer these and you have your part number. The finder above asks them for you.
How hot does it get?
80 °C (176 °F) covers the SMT line, production and storage. Moisture bake needs a 200 °C (392 °F) rack. Reflow, cure and stress testing need the all-aluminum 300 °C (572 °F) GL HT.
Does it feed a machine?
If the rack loads an SMT line, it adjusts to the board: gear for most lines, belt for narrow and mixed widths, screw clamp when one width runs a whole program. For holding, carrying and storing, a fixed-slot rack costs less.
Is it populated?
Populated, thick or warped boards need room. The GL HT has a 7.5 mm (0.295″) slot and the RA-24 Mini a 7.7 mm (0.303″) deep slot. When parts stand taller than the gap between boards, use every other slot.
What comes with every order
Buying the right rack should be the easy part of your week.
The right part, confirmedNot sure? An engineer confirms your part number before you order.
Spec sheets and drawingsFor every rack, free with a short form.
Volume pricing, automatic5+ packs save 5%, 10+ packs 10%, 20+ magazine racks 10%. No code.
Reorder planPut eligible racks on a schedule and save 10% on every delivery.
Spares that fitWear kits and spare parts for every chassis we sell.
Arrives rightDead on arrival? We replace it.
Order the way your company buys
Card today, or a PO and terms. The cart can go to whoever places the order.
Pay by card
Card, PayPal, Apple Pay or ACH at checkout.Find my rack
Order through purchasing
Send the list, the prices and a link to your cart to whoever places the order.
PO or terms
A formal quote with your cart already filled in. Terms are offered.
Questions
Ask Sam. Answers in seconds.
Sam is our spec engineer: sizes, part numbers, ESD, shipping. Tap a question or type your own.
Read all the answers
What size PCB magazine rack do I need?
Take the smallest rack whose largest board clears both edges of yours. Sizes run from 355 × 250 mm (13.98″ × 9.84″) on the B0103 to 620 × 460 mm (24.41″ × 18.11″) on the B0110.
What is the largest board a PCB rack can hold?
The B0110 racks take boards up to 620 × 460 mm (24.41″ × 18.11″), with gear or belt adjustment. Like every rack, they ship from the US in under 24 hours when in stock.
Which PCB rack can go in a bake oven?
A GM rack for moisture bake to 200 °C (392 °F), or an all-aluminum GL HT rack to 300 °C (572 °F). Standard 80 °C (176 °F) racks stay out of the oven.
Can your rack replace the one I use now?
Yes. Type the part number from your current rack in the finder and it shows ours for the same boards. If yours is not there yet, send it and an engineer matches it, usually the same day.
Are your PCB racks ESD-safe?
Yes, every one. They are conductive, 10⁴ Ω, so static drains to ground instead of sitting on your boards.
How fast do racks ship?
In-stock racks ship from the US in under 24 hours. When a rack is not on the shelf, the longest wait is 2 to 4 weeks, depending on quantity.
Which ESD turntable do I need?
The D380 has a 380 mm (14.96″) surface and carries up to 91 kg (200 lb). The D500 has a 500 mm (19.69″) surface and carries up to 113 kg (250 lb). Pick the one your assembly sits on.
Do you ship outside the US?
Yes. Email info@pcbracks.com before you order and we help with shipping, duties and paperwork.
5%
de chaque dollar gagné
Où va l'argent
Chaque commande redonne.
5 % de chaque dollar gagné par PCBRacks.com va directement à des œuvres soutenant les enfants, les vétérans et les personnes en rétablissement d'une addiction. Ce n'est pas un slogan, c'est la raison pour laquelle nous nous levons chaque matin.
Children
Veterans
People in recovery